如下為我司愛澤工業IZE_Industries本月到貨SEALWELD相關產品，歡迎致電索取樣本資料和產品信息。
SEALWELD閥D-SO-BV-CS介紹
Sealweld® 旋入式車身排氣工具
該工具專門設計用于讓您卸下車身潤滑脂和密封劑注入接頭中的止回球。
在維修多種類型的井口閘閥時，必須使用此工具。
它也是維修井口閘閥時平衡壓力的理想選擇。
此工具僅適用于碳鋼
Sealweld® Screw-On Body Vent Tool
This tool is specifically designed to allow you to un-seat the ball check in the body grease and sealant injection fittings.
This tool is a MUST when servicing many types of wellhead gate valves.
It is also ideal for equalizing pressure when servicing wellhead gate valves.
This tool is available in carbon steel ONLY
SEALWELD適配閥D-FW-LL1-SS介紹
Flow Wolf® Leak-Lock 適配器 #1
圓頭接頭應急密封裝置
將泄漏或損壞的管件轉換為安全管件，而無需停機或生產損失。 Sealweld® Leak-Lock 不是永久性維修設備，但應使用到預定的維修時間或管道減壓且可以安全更換泄漏管件時。 它還設計用于損壞的紐扣頭配件。
Leak-Lock 可用于需要第二個獨立止回閥以符合安全規范或公司政策的應用。 它可以永久保留或直到管道減壓并且可以安全地更換現有配件。
這種緊急密封裝置安裝在泄漏或損壞的巨型圓頭接頭上，并使用可更換的墊圈密封。
Flow Wolf® Leak-Lock Adapter #1
Emergency Sealing Device for Buttonhead Fittings
Convert leaking or damaged fittings into safe fittings without shutdown or loss of production. The Sealweld® Leak-Lock is not a permanent repair device but should be used until a scheduled turn-around or when the pipeline is depressurized and the leaking fitting can be replaced safely. It is also designed for use on damaged buttonhead fittings.
The Leak-Lock can be used in applications where a second independent check valve is required to comply with safety codes or company policy. It can be left on permanently or until the pipeline is depressurized and the existing fitting can be replaced safely.
This emergency sealing device fits on a leaking or damaged giant buttonhead fitting and utilizes a replaceable gasket seal.
SEALWELD適配閥D-FW-LL2-SS介紹
Flow Wolf® 防漏適配器 #2
這種緊急密封裝置可將小型圓頭接頭轉換為巨大的圓頭接頭接頭，并使用可更換的墊圈密封件。
Flow Wolf® Leak-Lock Adapter #2
This emergency sealing device converts a small buttonhead fitting to a giant buttonhead fitting fitting and utilizes a replaceable gasket seal.
SEALWELD閥D-FWLL-SS-ML介紹
鋼蓋 - 防止無人看管時泄漏。
獲得專利的 Flow Wolf 螺紋籠，用于安全注入緊急密封劑。
PTFE 墊圈 – 非常適合嚴重損壞的紐扣頭和難以容納液體和清潔劑。
Steel Cap - Prevents leakage when unattended.
Patented Flow Wolf threaded cage for safely injecting emergency sealants.
PTFE Gasket – ideal for severely damaged buttonheads and hard to hold liquids and cleaners.
SEALWELD接頭D-FW-SO-BH介紹
Flow Wolf® 旋入式適配器
該適配器從井口閘閥上常見的標準螺紋接頭（閥體潤滑脂接頭）變為標準的大型圓頭接頭。
它使您無需更換注射設備上的適配器即可快速維修閥門。 該適配器還延長了配件長度，讓您可以接觸到那些難以觸及的配件。
該轉接頭現貨供應，僅碳鋼材質。 可根據特殊要求提供不銹鋼或其他材料。
Flow Wolf® Screw-On Adapter
This adapter goes from a standard screw-on fitting (body grease fitting) typically found on wellhead gate valves to a standard large buttonhead fitting.
It allows you to quickly service a valve without changing the adapter on your injection equipment. This adapter also extends the fitting length allowing you to get at those hard-to-reach fittings.
This adapter is available from stock in carbon steel ONLY. Stainless steel or other materials are available by special request.
SEALWELD注脂槍G-SGUN-C介紹
Sealweld® SuperGun® 泵有一個超長的杠桿手柄，使高壓注射變得容易。
它重量輕，非常便攜。 螺旋填料設計指示桶中剩余的產品量，高壓止回閥系統可防止背壓引起的危險“反沖”。
SuperGun® 泵的設計能夠承受現場使用的嚴酷條件，并且每個泵在裝運前都經過測試。 耐用、易于攜帶和更快的泵送使其成為閥門技術人員最喜歡的手持式高壓密封劑注入泵，用于在僅需要少量潤滑劑的情況下進行加注。
The Sealweld® SuperGun® Pump has an extra long lever handle that makes high-pressure injection easy.
It is lightweight and very portable. The screw-primed design indicates how much product remains in the barrel and the high-pressure check valve system prevents dangerous “kicks” caused by back pressure.
The SuperGun® Pump has been designed to withstand the rigors of field use and every pump is tested prior to shipment. Durability, easy to carry and faster pumping make it the valve technician’s favorite hand-held, high-pressure sealant injection pump for topping-up procedures when only small quantities of lubricant are required.
SEALWELD注脂槍/閥/接頭/墊片常用型號：
SEALWELD G-EZ-LOARDER
SEALWELD G-UGUN-C
SEALWELD G-HGUN-C
SEALWELD G-SGUN-C
SEALWELD G-A8GUN-C
SEALWELD D-LL-GSK-ASB
SEALWELD F-FW-OA1/4-T-SS
SEALWELD F-FW-OA1/4-SS
SEALWELD F-FW-OA1/4-T-CS
SEALWELD F-FW-OA1/4-CS
SEALWELD D-FWLL2-SS-ML
SEALWELD D-FWLL-SS-ML
SEALWELD D-FW-CAM-SO-CS
SEALWELD D-SO-BV-CS
SEALWELD D-FW-LL1-SS
SEALWELD D-FW-LL2-SS
SEALWELD D-FWLL-SS-ML
SEALWELD D-FW-SO-BH
SEALWELD LL-GSK-ASB
SEALWELD注脂槍G-SGUN-C （含套筒） SEALWELD注脂槍G-SGN-C
如果您需要完整的SEALWELD的相關技術咨詢，請隨時致電愛澤工業（021-3100 6702），或者訪問網站www.ize-industries.com,我們將盡全力解決您的問題。
If you have any question for SEALWELD，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
SEALWELD閥D-SO-BV-CS
SEALWELD適配閥D-FW-LL1-SS
SEALWELD適配閥D-FW-LL2-SS
SEALWELD適配閥D-FWLL-SS-ML
SEALWELD接頭D-FW-SO-BH
SEALWELD墊片LL-GSK-ASB
SEALWELD注脂槍G-SGUN-C （含套筒）
SEALWELD注脂槍G-SGN-C
SEALWELD閥D-SO-BV-CS介紹
Sealweld® 旋入式車身排氣工具
該工具專門設計用于讓您卸下車身潤滑脂和密封劑注入接頭中的止回球。
在維修多種類型的井口閘閥時，必須使用此工具。
它也是維修井口閘閥時平衡壓力的理想選擇。
此工具僅適用于碳鋼
Sealweld® Screw-On Body Vent Tool
This tool is specifically designed to allow you to un-seat the ball check in the body grease and sealant injection fittings.
This tool is a MUST when servicing many types of wellhead gate valves.
It is also ideal for equalizing pressure when servicing wellhead gate valves.
This tool is available in carbon steel ONLY
SEALWELD適配閥D-FW-LL1-SS介紹
Flow Wolf® Leak-Lock 適配器 #1
圓頭接頭應急密封裝置
將泄漏或損壞的管件轉換為安全管件，而無需停機或生產損失。 Sealweld® Leak-Lock 不是永久性維修設備，但應使用到預定的維修時間或管道減壓且可以安全更換泄漏管件時。 它還設計用于損壞的紐扣頭配件。
Leak-Lock 可用于需要第二個獨立止回閥以符合安全規范或公司政策的應用。 它可以永久保留或直到管道減壓并且可以安全地更換現有配件。
這種緊急密封裝置安裝在泄漏或損壞的巨型圓頭接頭上，并使用可更換的墊圈密封。
Flow Wolf® Leak-Lock Adapter #1
Emergency Sealing Device for Buttonhead Fittings
Convert leaking or damaged fittings into safe fittings without shutdown or loss of production. The Sealweld® Leak-Lock is not a permanent repair device but should be used until a scheduled turn-around or when the pipeline is depressurized and the leaking fitting can be replaced safely. It is also designed for use on damaged buttonhead fittings.
The Leak-Lock can be used in applications where a second independent check valve is required to comply with safety codes or company policy. It can be left on permanently or until the pipeline is depressurized and the existing fitting can be replaced safely.
This emergency sealing device fits on a leaking or damaged giant buttonhead fitting and utilizes a replaceable gasket seal.
SEALWELD適配閥D-FW-LL2-SS介紹
Flow Wolf® 防漏適配器 #2
這種緊急密封裝置可將小型圓頭接頭轉換為巨大的圓頭接頭接頭，并使用可更換的墊圈密封件。
Flow Wolf® Leak-Lock Adapter #2
This emergency sealing device converts a small buttonhead fitting to a giant buttonhead fitting fitting and utilizes a replaceable gasket seal.
SEALWELD閥D-FWLL-SS-ML介紹
鋼蓋 - 防止無人看管時泄漏。
獲得專利的 Flow Wolf 螺紋籠，用于安全注入緊急密封劑。
PTFE 墊圈 – 非常適合嚴重損壞的紐扣頭和難以容納液體和清潔劑。
Steel Cap - Prevents leakage when unattended.
Patented Flow Wolf threaded cage for safely injecting emergency sealants.
PTFE Gasket – ideal for severely damaged buttonheads and hard to hold liquids and cleaners.
SEALWELD接頭D-FW-SO-BH介紹
Flow Wolf® 旋入式適配器
該適配器從井口閘閥上常見的標準螺紋接頭（閥體潤滑脂接頭）變為標準的大型圓頭接頭。
它使您無需更換注射設備上的適配器即可快速維修閥門。 該適配器還延長了配件長度，讓您可以接觸到那些難以觸及的配件。
該轉接頭現貨供應，僅碳鋼材質。 可根據特殊要求提供不銹鋼或其他材料。
Flow Wolf® Screw-On Adapter
This adapter goes from a standard screw-on fitting (body grease fitting) typically found on wellhead gate valves to a standard large buttonhead fitting.
It allows you to quickly service a valve without changing the adapter on your injection equipment. This adapter also extends the fitting length allowing you to get at those hard-to-reach fittings.
This adapter is available from stock in carbon steel ONLY. Stainless steel or other materials are available by special request.
SEALWELD注脂槍G-SGUN-C介紹
Sealweld® SuperGun® 泵有一個超長的杠桿手柄，使高壓注射變得容易。
它重量輕，非常便攜。 螺旋填料設計指示桶中剩余的產品量，高壓止回閥系統可防止背壓引起的危險“反沖”。
SuperGun® 泵的設計能夠承受現場使用的嚴酷條件，并且每個泵在裝運前都經過測試。 耐用、易于攜帶和更快的泵送使其成為閥門技術人員最喜歡的手持式高壓密封劑注入泵，用于在僅需要少量潤滑劑的情況下進行加注。
The Sealweld® SuperGun® Pump has an extra long lever handle that makes high-pressure injection easy.
It is lightweight and very portable. The screw-primed design indicates how much product remains in the barrel and the high-pressure check valve system prevents dangerous “kicks” caused by back pressure.
The SuperGun® Pump has been designed to withstand the rigors of field use and every pump is tested prior to shipment. Durability, easy to carry and faster pumping make it the valve technician’s favorite hand-held, high-pressure sealant injection pump for topping-up procedures when only small quantities of lubricant are required.
SEALWELD注脂槍/閥/接頭/墊片常用型號：
SEALWELD G-EZ-LOARDER
SEALWELD G-UGUN-C
SEALWELD G-HGUN-C
SEALWELD G-SGUN-C
SEALWELD G-A8GUN-C
SEALWELD D-LL-GSK-ASB
SEALWELD F-FW-OA1/4-T-SS
SEALWELD F-FW-OA1/4-SS
SEALWELD F-FW-OA1/4-T-CS
SEALWELD F-FW-OA1/4-CS
SEALWELD D-FWLL2-SS-ML
SEALWELD D-FWLL-SS-ML
SEALWELD D-FW-CAM-SO-CS
SEALWELD D-SO-BV-CS
SEALWELD D-FW-LL1-SS
SEALWELD D-FW-LL2-SS
SEALWELD D-FWLL-SS-ML
SEALWELD D-FW-SO-BH
SEALWELD LL-GSK-ASB
SEALWELD注脂槍G-SGUN-C （含套筒） SEALWELD注脂槍G-SGN-C
如果您需要完整的SEALWELD的相關技術咨詢，請隨時致電愛澤工業（021-3100 6702），或者訪問網站www.ize-industries.com,我們將盡全力解決您的問題。
If you have any question for SEALWELD，please feel free to dial 0086-21-3100 6702 or browse our website: www.ize-industries.com.
IZE-industries
Contact Information：
Fax：0086-21-35350711
Mobile：0086-189 1750 1433
E-mail：sales@ize-industries.com
Website：www.ize-industries.com
