HONEYWELL V7-7B17D8-201

valves for Fire Protection Systems 消防系統閥門
Inbal Valves: Deluge Valves 雨淋閥
Inbal雨淋閥被設計為允許用于各種檢測和釋放系統：
液壓驅動
氣動執行機構
電器開動
PNEU-電器開動
Inbal Valves: Remote Control Valves 遠程控制閥
Inbal遠程CONTROLE閥專為各種驅動系統：
液壓驅動
氣動執行機構
電器開動
PNEU-電器開動 廈門緯軒機電設備有限公司
Inbal Valves: Pressure Control Deluge Valves 壓力控制雨淋閥
Inbal Valves: Dry Pipe Systems 干管系統
Inbal Dry Pipe Valves are FM approved to 300 psi (21 bar) in sizes 3", 4", 6", and 8" (80, 100, 150, and 200 mm).
Inbal Valves: Preaction Systems
Inbal Preaction Systems are available in the following configurations:

 Non-Interlock - Utilizes a dry pipe valve and a supplemental pneumatic or electric detection system. The valve may be opened either by operation of a sprinkler in the sprinkler piping or by operation of the detection system. 

 Single Interlock - Utilizes a deluge valve and a supervisory air pressure system. Loss of air in the sprinkler piping system due to damaged piping or broken sprinklers will only operate the alarm systems and will not cause water to flow through the deluge valve and into the system. The valve will open only if the electric or pneumatic detection system operated.廈門緯軒機電設備有限公司 

 Double Interlock - Utilizes an automatic water control valve, an electric or pneumatic detection system, and a pressurized (air or gas) sprinkler piping system. Only operation of both detection and sprinkler piping systems will allow water to enter the sprinkler system and be discharged through the fused sprinkler(s). The valve is FM approved to 300 psi (21 bar) in sizes 3", 4", 6", and 8" (80, 100, 150, & 200 mm) as a valve for Refrigerated Areas.
Inbal Valves: Pressure / Flow Control Valves 壓力/流量控制閥

Pressure Relief Valve 減壓閥
The Inbal pressure relief valves are used to release excess pressure that may develop as a result of a sudden change in the velocity of the water flowing in the pipe.廈門緯軒機電設備有限公司

Pressure Sustaining Valve 壓力維持閥
The Inbal pressure sustaining valves are used to sustain the system pressure to a predetermined maximum level. The applications balance the pressure distribution throughout the whole system by maintaining the minimum pressure for high altitude users. Pressure sustaining valves are also used to prevent discharging of the pipe system when any user starts to operate.
Pressure Reducing Valve 減壓閥
The Inbal pressure reducing valves maintain a predetermined outlet pressure which remains steady and unaffected by either changing of inlet pressure and/or various demands. Inbal Pressure Reducing Valves are self contained control valves which do not require external power
Inbal Valves:  Valves Control Panels 閥門控制面板