5crnimo圓鋼圓棒

南通——倍徠斯金屬—連云港5crnimo河北5crnimo

前幾日，5crnimo圓鋼筆者自上海前往北京，高鐵路上一直關注的便是空氣質量的情況，沿途見到部分區域霧霾籠罩；為了“閱兵藍”，5crnimo圓鋼北京市及周邊省市政府環保應對方案陸續出臺，但對于污染性企業停產、限產時長力度不及預期，因此筆者甚是為北京空氣質量擔憂。抵達北京之后，現實情況一掃心中憂慮，藍天白云、行車暢通、PM2.5非常低。

        5crnimo圓鋼也正是因為天氣質量超于預期，所以此輪“環保風”整體力度弱于前期預測，譬如京津等周邊地區鋼廠停產、限產尚未啟動，唯有北京城區建筑工地幾乎停工。

        因此近期國內5crnimo圓鋼鋼材供應力度下降并不明顯，截止8月21日全國163家鋼鐵生產企業高爐產能利用率為85.67%，周環比增0.3%；螺紋鋼生產線產能利率為70.84%，高于近兩個月的平均水平；線材生產線產能利用率為66.37%，為近兩個月的高點；熱軋卷板生產線產能利用率為85.97%；冷軋生產線產能利用率為81.74%；中厚板生產線產能利用率為72.14%；相對而言，5crnimo圓鋼板材產能利用率處于近兩個月的偏低水平，但實際縮量很少。

A few days ago, the author from Shanghai to Beijing, high railway has been the concern of is the air quality, saw along the way shrouded in haze in some areas, in order to "parade blue", to deal with environmental protection scheme of Beijing city and surrounding provinces and cities government comes on stage in succession, but for polluting enterprises stop production, limited production long efforts to less than expected, so the author is very worry about the air quality in Beijing. After arriving in Beijing, the reality of the situation swept away the worries in the heart, the blue sky and white clouds, traffic flow, PM2.5 is very low.
Is because the weather quality than expected, so this round of "environmental winds" overall strength weak in the early prediction, such as Beijing, Tianjin and surrounding areas such as steel production, limited production has not yet started, only Beijing urban construction sites almost shut down.
The recent domestic steel supply intensity was not significantly decreased, deadline August 21, the 163 iron and steel production enterprises of blast furnace capacity utilization is 85.67%, circumferential an increase of 0.3%; thread steel production line capacity rate was 70.84%, higher than the nearly two months on average; wire rod production line capacity utilization 66.37%, nearly two month highs; hot-rolled strip production line capacity use rate for 85.97%; cold rolling production line capacity utilization rate of 81.74%; plate production line capacity utilization rate of 72.14%; relatively speaking, plate production capacity utilization rate in nearly two months of low level, but the actual shrinkage rarely.