電流開關 CS20-R
Current Relay CS20-R
The CS20-R is a low cost current relay designed for applica-tion that require an on-off indication of current. The relay will act while current is above the pre-set value，the current relay is recommended to be used for application where the operat-ing current is above 200mA。It is with 3 way selector that is used for to select the load circuit needed to be monitor.
The typical application is to monitor the work status of heat-ing element. When the load lose more than 1/3, the current switch will alarm, the alarm indicator will bright, and the con-tacts of relay will switch.
CS20-R電流開關，是一種低成本,專為只需要指示和告警電流有或無的場合應用的電流繼電器。電流值超過電流預置值時就能改變輸出繼電器的狀態，因此電流開關能應用于監視電流為200mA以上的場合。帶有3路選擇開關，可用于選取需要監視的負載回路。
典型的應用場合為監視加熱元件的工作狀態。當加熱元件開路時，電流開關的告警指示燈會亮起，其輔助接點就會輸出告警信號；當組合式加熱元件中部分缺失，電流開關也會告警。
應用場合
Application
技術數據
Technical data
CS20-R
電源
power supply
AC220V, 50/60Hz
功耗
Power consumption
<2W
接線端子
Terminals
導線截面最大至4mm2
Conductors up to 4mm2
防護等級
Protection class
IP30
環境溫度
Ambient temperature
-25 °C to +45°C
使用壽命
Life span
>100,000h
額定電流
Rated current
2.5A
額定動作點
Rated acting point
<200mA
響應時間
Response time
<1s
初始化時間
Initial time
<3s
繼電器觸點
Relay contacts
1NO+1NC
繼電器觸點額定開斷容量
Rated contacts switching capacity
AC-15/250V 6A
耐壓強度
Insulating strength
AC2000V, 50Hz, 1Min
安裝位置
Location mounted
任意
As desire
安裝方式
Mount method
DIN35mm導軌安裝
Mount at DIN35 rail
外殼材料
Material of enclosure
材料性能符合DIN7708標準
Insulating material according to DIN7708
