EXC-8000cPCI 多協議板

該板 多支持6個模塊，每個模塊代表一個獨立的測試和仿真設備。大多數模塊基于現有的 Excalibur 產品，例如 1553 Px 系列和?ARINC429?RxTx。?

額外的模塊正在不斷添加。EXC-8000 系列代表了航空電子測試設備靈活性方面的突破，允許通過單板模擬整個測試套件。例如，可以從單個 EXC-8000cPCI 板控制 20 個 ARINC-429 通道、一個 1553 通道和離散 I/O。大多數模塊都是基于雙端口 RAM 處理器，并為卡提供簡單而強大的接口。?

EXC-8000cPCI 附帶 C 驅動程序，包括源代碼。?

有關可添加到該卡的協議的更多信息，請參閱多協議 8000 模塊。

?

訂購信息：

?

注：
“xx”表示與載板一起訂購的模塊（ 多 6 個模塊）。
添加到部件號末尾的“-E” 擴展溫度（-40° 至 85°C）選項。
添加到部件號末尾的“-001” 保形涂層選項。

The M8KSerial is an enhanced serial interface module for the multiprotocol Excalibur 8000 family of carrier boards, that includes several advanced features such as a high baud rate and high throughput. This module supports up to?two independent channels of serial communications, each of which can be selected as RS-485, RS-422 or RS-232. The module operates independently of the host computer, reducing the need for host intervention.

The M8KSerial?module is based on the Exar XR16M570 Universal Asynchronous Receiver/Transmitter (UART). The device is compatible to industry standard 16550 UARTs. Each of the M4KSerialPlus’s four channels contains a transmit FIFO capable of holding up to 16384 bytes and a receive FIFO capable of holding either 16384 receive bytes or 5460 bytes with a 32-bit Time Tag associated with each byte. These large buffers allow application code to transfer large quantities of data with a single non-blocking subroutine call. The 32-bit Time Tag on receive channels is very useful for synchronizing serial data with data from other modules on the 8000 board or on other interface boards. Each channel has a programmable baud rate of up to 10 Mbps and can be configured as RS-232, RS-422 or RS-485.

The M8KSerial module is supplied with C drivers, including source code.

?

Ordering Information:

?

Note:
"-E" added to the end of the part number specifies extended temperature (-40° to 85°C) option.
"-001" added to the end of the part number specifies conformal coating option.

"-004" added to the end of the part number specifies PCI Express cards only option.