城市管廊聚氨酯密封膠標準
聚氨酯建筑密封膏屬雙組份反應固化型，有A、B兩組份組成。A組分為乳白色或淺黃色粘稠狀聚氨酯預聚體，B組分為固化劑與助劑等混合脫水而成的黑色膏狀體或液體，固化后具有一定的彈性及粘結性，（A組份：B組份=10：0.8～1.2）。
Polyurethane building sealant is a two component reactive curing type, consisting of two components of A and B. The A component is milky white or light yellow viscous polyurethane prepolymer, and group B as curing agent and additives mixed dehydration black paste or liquid, after curing with elasticity and adhesion of the (A group: B group =10:0.8 ~ 1.2).
原理
principle
基層處理：被粘面必須進行整齊處理（可用手提切割機，砂輪，剛刷等），使涂膠面露出牢固的結構層。
Base treatment: the adhesive surface must be handled neatly (portable cutting machine, grinding wheel, rigid brush, etc.), so that the surface of the coating is exposed to a solid structure layer.
城市管廊聚氨酯密封膠標準
接縫表面必須保證完全干燥、清潔、無霜。表面所有灰塵和水泥稀漿必須清刷處理干凈。金屬表面的銹層及保護漆也需除去。如構筑物不干，可用噴燈烘干。
The joint surface must be completely dry, clean and frost free. All dust and cement slurry on the surface must be cleaned and cleaned. Rust and protective paint on metal surface also need to be removed. Such structures do not use torch drying.
多孔表面涂膠前需先涂底涂料. 底涂料只需刷涂一薄層,待其表面不粘手后方可涂密封膠嵌縫.（本公司有配套的各種底涂料供給）。
Before the first coating porous surface coating primer primer. Only need to brush a thin layer, the surface is not sticky rear can be coated with sealant. (the company is supporting the various bottom paint supply).
特點
Characteristic
優良的耐磨性、低溫柔軟性，性能可調節范圍較廣，機械強度大，粘接性好，彈性好，具有優良的復原性，可適合動態接縫和變形縫、伸縮縫。耐候性好，耐油性優良，耐生物老化且價格低廉。
It has excellent abrasion resistance, low softness and softness, wide range of adjustable properties, good mechanical strength, good adhesion, good elasticity, excellent resilience, and suitable for dynamic joints, deformation joints and expansion joints. Good weather resistance, good oil resistance, aging resistance and low price.
聚氨酯密封膠也有一些缺點。如：不能長期耐熱；淺色配方容易受紫外光老化；單組分膠貯存穩定性受包裝及外界影響較大，通常固化較慢；高溫?zé)岘h(huán)境下可能產生氣泡和裂紋；許多場合需要底涂。同時聚氨酯密封膠耐水性也較差，特別是耐堿水性欠佳。
Polyurethane sealant also has some disadvantages. Such as: not long-term heat; light formula vulnerable to UV aging; single component storage stability by packaging and external influence, usually curing slowly; may produce bubbles and cracks under high temperature environment; many occasions need primer. At the same time, polyurethane sealant is also poor in water resistance, especially alkali resistance.
適用范圍
城市管廊聚氨酯密封膠標準
Applicable scope
該產品使用于土木建筑業、交通運輸業、混凝土預制件等建材的連接及施工縫的填充密封。高級道路、橋梁、飛機跑道、地下管道、接頭處的連接密封以及隧道和建筑物的伸縮縫與變形縫。
The product is used for the connection of building materials, such as civil engineering, transportation, precast concrete and filling sealing of construction joints. Connections and seals of advanced roads, bridges, runways, underground pipes, joints, and expansion joints and deformation joints of tunnels and buildings.
城市管廊聚氨酯密封膠標準
