The MAX705–MAX708/MAX813L microprocessor (μP) supervisory circuits reduce the complexity and number of components required to monitor power-supply and battery functions in μP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components.
The MAX705/MAX706/MAX813L provide four functions:
-
A reset output during power-up, power-down, and brownout conditions.
-
An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6 seconds.
-
A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V.
-
An active-low manual-reset input.
The MAX707/MAX708 are the same as the MAX705/MAX706, except an active-high reset is substituted for the watchdog timer. The MAX813L is the same as the MAX705, except RESET is provided instead of active-low RESET.
Two supply-voltage monitor levels are available: The MAX705/MAX707/MAX813L generate a reset pulse when the supply voltage drops below 4.65V, while the MAX706/MAX708 generate a reset pulse below 4.40V. All four parts are available in 8-pin DIP, SO and μMAX
? packages.
關鍵特性
-
Available in Tiny μMAX Package
-
Guaranteed RESET Valid at VCC = 1V
-
Precision Supply-Voltage Monitor
-
4.65V in MAX705/MAX707/MAX813L
-
4.40V in MAX706/MAX708
-
200ms Reset Pulse Width
-
Debounced TTL/CMOS-Compatible Manual-Reset Input
-
Independent Watchdog Timer—1.6s Timeout (MAX705/MAX706)
-
Active-High Reset Output (MAX707/MAX708/MAX813L)
-
Voltage Monitor for Power-Fail or Low-Battery Warning
應用/使用
-
汽車電子
-
計算機：臺式機、工作站和服務器
-
控制器
-
精確的μP監控
-
智能儀表
在線客服：0571-87774297
