- 產(chǎn)品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
|
牌號 Trade Name |
直徑 Diameter |
HRC （國家標準臺式硬度計） |
特點及主要用途 characteristics and application |
|
HB-YD114(Q) |
1.6 |
50-55 (受強烈沖擊后 After high impact) |
高錳鋼堆焊焊絲，受強烈沖擊后，表面具有加工硬度的特點。 High-manganese steel hardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
|
HB-YD115(Q) |
1.6 |
50-55 (受強烈沖擊后After high impact ) |
用于受嚴重沖擊高錳鋼堆焊，加工硬化效果顯著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
|
HB-YD165(Q) |
1.6 |
60-65 |
高硬度耐磨焊絲，適用于磨粒磨損表面堆焊 High hardness wear-resistant wire, it is used to abrasive wear surfacing welding. |
|
HB-YD172(Q) |
1.6 |
≥40 |
用于堆焊齒輪、挖泥斗、礦山機械等磨損件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
|
HB-YD207(Q) |
1.6 |
≥50 |
用于堆焊推土機刀片，螺旋槳等磨損零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
|
HB-YD212(Q) |
1.2/1.6 |
≥50 |
用于堆焊各種受磨損的機件表面，如齒輪、挖斗、礦山機械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
|
HB-YD256(Q) |
1.6 |
HB≥170 |
高錳鋼堆焊，適用于破碎機等受沖擊磨損部位的堆焊 High-manganese steel hardfacing flux-cored Wires, it is applied to repair surface of high impact wear parts, such as Crusher. |
|
HB-YD258(Q) |
1.6 |
55-60 |
用于耐磨表面堆焊 Applied to repair surface of wear parts. |
|
HB-YD265(Q) |
1.6 |
60-65 |
高硬度耐磨焊絲，適用于磨粒磨損表面堆焊 High hardness wear-resistant wire, it is used to abrasive wear surfacing welding. |
|
HB-YD322(Q) |
1.6 |
≥55 |
用于堆焊各種沖模及切削刃具，兼用于修復要求耐磨損性能較高之機械零件 Applied to repair surface of high wear resistance parts, such as die and cutting cutlery. |
|
HB-YD327A(Q) |
1.6 |
≥55 |
專門用于模具堆焊，耐磨性能高于D322 Used to mould surfacing, wear resistance is better than D322. |
|
HB-YD337(Q) |
1.6 |
≥48 |
用于鑄鋼或鍛鋼上堆焊鍛模 Applied to repair forging die at cast steel or forging steel. |
|
HB-YD397(Q) |
1.6 |
≥40 |
用于堆焊鑄鋼或鍛鋼做坯體的熱鍛模或堆焊高強度耐磨件 Applied to repair hot forging die at cast steel or forging steel, or high strength wear surfacing. |
|
HB-YD405A(Q) |
1.6 |
50-59 |
用于熱軋輥開坯輥堆焊 Applied to repair hot-rolling blooming rollor. |
|
HB-YD430A(Q) |
1.6 |
20-35 |
打底層堆焊焊絲 A backing hardfacing flux-cored Wires |
|
HB-YD488A(Q) |
1.6 |
45-50 |
用于軋輥堆焊 Applied to repair rollor |
|
HB-YD507Mo(Q) |
1.6 |
35-45 |
用于510℃以下中高壓閥門堆焊 Applied to valve which operating temperature is less than 510℃. |
|
HB-YD518(Q) |
1.6 |
40-50 |
用于連鑄輥堆焊 Applied to repair continuous caster roller |
|
HB-YD688(Q) |
1.6 |
50-60 |
用于磨煤輥打底焊(韌性好，可以多層堆焊) Used to coal roller backing welding. |
|
HB-YD788(Q) |
1.6 |
55-62 |
硬度高，可以多層堆焊。 |
