生活污水廢水處理設備天通水處理設備服務好

常生活的餐飲廢水、糞便廢水、以及洗浴廢水等。從廢水來源結構復雜程度分析，和食品廢水很類似。

食品工業原料廣泛，制品種類繁多，排出廢水的水量、水質差異很大。但總體來說食品廢水中主要污染物有

（1）漂浮在廢水中固體物質，如菜葉、果皮、碎肉、禽羽等

（2）懸浮在廢水中的物質有油脂、蛋白質、淀粉、膠體物質等

（3）溶解在廢水中的酸、堿、鹽、糖類等

（4）原料夾帶的泥砂及其他有機物等

（5）致命病菌等

濟寧天通是一家水處理設備生產和銷售集一體的公司，公司擁有高尖端的技術人才，擁有高素質的工作團隊，可以及時地為客戶提供完善的售后服務。我公司主要產品：水處理設備，污水處理設備、廢水處理設備、工業污水設備、農業廢水設備、雨水凈水設備、醫院污水設備、鋼廠廢水設備、屠宰場廢水設備、食品廠廢水處理設備等多種設備，可根據要求專業定制水處理設備。

生活污水項目概況 

300m3/d生活污水處理工程。 

進水水質

項目  COD  BOD  SS   NH3-N  TN

數值  250  100  100  35     60

出水水質

項目  COD  BOD  SS   NH3-N  TN

數值  60   20   20     8    20

工藝流程簡介 

生活污水首先流至粗、細格柵去除粗大懸浮物及漂浮物后流入集水池，集水池出水經泵（考慮來水埋深可能較深，故設置提升泵）提升至調節池，在池內進行均質、均量的調節，出水經提升泵提升至生化系統（缺氧池+接觸氧化池），在缺氧內進行反硝化，通過反硝化細菌將污水中的硝態氮（包括接觸氧化池混合液回流中的硝態氮）轉化為氮氣，在接觸氧化池內通入空氣，以滿足好氧菌對氧氣的需求，同時通過空氣攪拌使池內污泥與污水充分混合，增加污水與好氧菌接觸機率，促進水中污染物的降解，較快去除水中污染物質；好氧池內的出水自流進入二沉池，進行泥水分離；二沉池上清液經消毒后達標排放。 

二沉池的污泥排至污泥濃縮池，經濃縮后送至帶式壓濾機脫水；脫水污泥外運處置，污泥濃縮池上清液和帶機壓濾液回流至集水池。

Daily food waste water, waste water and bath water, etc. Analysis of the complexity of the source structure of wastewater is similar to that of food wastewater.

The food industry has a wide range of raw materials and various kinds of products. The water quantity and water quality are very different. But in general, the main pollutants in food waste water are

(1) solid material floating in waste water, such as vegetable leaves, peel, crushed meat, and poultry, etc

(2) substances suspended in waste water have grease, protein, starch, colloidal substances, etc

(3) acid, alkali, salt and sugar dissolved in wastewater

(4) mud sand and other organic materials of the raw material

(5) deadly germs, etc

Jining day pass is a set of water treatment equipment production and sales of the company, the company has sophisticated technology talented person, has a high quality work team, can provide customers with perfect after-sales service in a timely manner. My company main products: water treatment equipment, sewage treatment equipment, wastewater treatment, industrial wastewater, agricultural wastewater, rain water purification equipment, hospital sewage equipment, steel plant waste water equipment, slaughterhouse wastewater treatment equipment, food factory waste water treatment equipment and other equipment, can professional custom according to the water treatment equipment.

General situation of sewage project

300m3/d sewage treatment works.

The water quality

Project COD BOD SS nh3-n TN

It's 250, 100, 100, 100, 35, 60

Effluent water quality

Project COD BOD SS nh3-n TN

Numbers 60, 20, 20, 8, 20

Introduction to process flow

Sewage flow first to coarse and fine screen after removing bulky suspended solids and debris into the collecting basin, collecting basin water through the pump (consider possible water depth is deeper, so set the lift pump) to adjust pool, homogeneous in the pool, the average adjustment, the lift pump water up to the biochemical system (anaerobic pool + contact oxidation pool), in anoxic denitrification, nitrate nitrogen in wastewater by denitrifying bacteria (including the contact oxidation pool backflow of no3 -- n) mixture into nitrogen gas, in the contact oxidation pool into the air, in order to meet the demand for oxygen in aerobic bacteria, at the same time, through the air mixing pool sludge and sewage mixed fully, increasing chances sewage contact with aerobic bacteria, promote the degradation of pollutants in water, quickly remove the water pollution; The flow of water from the aerobic tank enters the sink, and the mud water is separated. After disinfection, the two sinks were disinfected.

The sludge of the two sinks is drained into the sludge concentration tank, which is then condensed and sent to the belt filter press for dehydration. Dehydration sludge disposal, the sludge concentrate and the filter fluid flow back to the collecting tank.