工業廢水是在工礦生產活動中產生的廢水。工業廢水可分為生產污水與生產廢水。生產污水是指在生產過程中形成、并被生產原料、半成品或成品等原料所污染，也包括熱污染（指生產過程中產生的、水溫超過60℃的水）；生產廢水是指在生產過程中形成，但未直接參與生產工藝、未被生產原料、半成品或成品等原料所污染或只是溫度少有上升的水。生產污水需要進行凈化處理；生產廢水不需要凈化處理或僅需做簡單的處理，如冷卻處理。

案例：

某鋼廠形成600萬噸/年生產規模時，平均排水量將達到4000m3/h。廢水處理工程設計平均日處理能力9.6萬米³，夏季最大日處理能力10.8萬米³,其中70%作為工業補水回到廠區管網，其余達標后排放。

  該廢水處理回用工程于2010年4月開工建設，20012年1月主體結構完工，2012年5月試運行，2012年8月交付生產。工程占地29500㎡，新建建、構筑物占地8041㎡，綠化覆蓋率32%，靜態投資為8643萬元。

廠區全部廢水經處理后達到排放標準，其中回用水經軟化、過濾、消毒等深度處理后，達到生產用水標準。

本工程進水為典型的鋼鐵工業廢水，有機污染物含量不高，可生化性差，不適宜采用生化方法降解。本項目主要采用物理化學法。作為工業補水，在回用水深度處理中增加去除暫時硬度、總堿度軟化、過濾、消毒等工藝。

濟寧天通機械有限公司是從事水處理設備生產與銷售一體化的公司。 多年來，我公司堅持以“群策群力，開創未來，注重細節，追求完美”的管理理念不斷加強內部管理，積累豐富的管理經驗，注重提高自身素質，自始至終堅持信譽至上，質量第一，安全生產，文明施工的原則，樹立了良好的社會形象，贏得了較好的經濟效益和社會信譽。

我公司主要產品：水處理設備，污水處理設備、廢水處理設備、工業污水設備、農業廢水設備、雨水凈水設備、醫院污水設備、鋼廠廢水設備、屠宰場廢水設備、食品廠廢水處理設備等多種設備，可根據要求專業定制水處理設備。

Industrial wastewater is a waste water produced in the industrial and mining activities. Industrial wastewater can be divided into production sewage and production wastewater. Production sewage refers to the production process of formation, and is the production of raw materials, pollution of semi-finished or finished products and other raw materials, including thermal pollution (refers to water generated in the production process, more than 60 DEG water); production wastewater is formed in the process of production, but is not directly involved in the production process, production is not raw materials, semi-finished products or finished products and other raw materials contaminated or just little water temperature rise. The production sewage needs to be cleaned and treated; the production wastewater does not need to be cleaned or simply treated, such as cooling treatment.

Case:

The formation of a steel production scale of 6 million tons / year, the average drainage volume will reach 4000m fand /h. The average daily processing capacity of wastewater treatment engineering design is 96 thousand meters and 3, and the maximum daily processing capacity of summer is 108 thousand meters and 3. 70% of them are discharged into the industrial network as an industrial water supplement, and the rest is discharged after reaching the standard.

The wastewater treatment and reuse project was built in April 2010, the main structure was completed in January 20012, the trial operation in May 2012, and production in August 2012. The project covers an area of 29500 square meters, an area of 8041 square meters, the new building structures, green coverage rate of 32%, the static investment of 86 million 430 thousand yuan.

All the treated wastewater to meet the discharge standards, advanced treatment of water softening, filtration, disinfection back, achieve production water standard.

This project is a typical iron and steel industrial wastewater with low organic pollutant content and poor biodegradability, which is not suitable for biodegradation. This project mainly adopts physical chemistry method. As an industrial water supplement, the process of removing temporary hardness, total alkalinity softening, filtration and disinfection is increased in the treatment of water reuse.

Jining Tian Tong Machinery Co., Ltd. is a company engaged in the integration of the production and sales of water treatment equipment. Over the years, our company adhere to the "hand in hand, create the future, attention to detail, the pursuit of perfection" management concept, continue to strengthen internal management, accumulated rich management experience, improve their own quality, from first to last insist on the supremacy of credibility, quality first, safety production, civilized construction principle, establish a good social image, to win a better the economic benefits and social credit.

Our main products: water treatment equipment, sewage treatment equipment, sewage treatment equipment, industrial equipment, agricultural sewage water equipment, water purification equipment, water equipment, steel hospital sewage water equipment, slaughterhouse wastewater equipment, food factory wastewater treatment equipment and other equipment, can be customized according to the requirements of professional water treatment equipment.