梅思安MSA FlameGard 5 UV/IR 紫外紅外火焰探測器正品現貨

梅思安MSA FlameGard 5 UV/IR 紫外紅外火焰探測器正品現貨

歡迎垂電馮經理17562231583  或者微信yu18660710128（qq：214864637）詢客服享更低價

正品承諾:本店所售產品均為正品行貨,接受任何正規渠道的鑒定!如果發現是假貨,本店負責全額退款,

梅思安MSA FlameGard 5 UV/IR 紫外紅外火焰探測器正品現貨

產品描述：

FlameGard 5 UV/IR紫外紅外火焰探測器用于檢測碳氫化合物燃燒火焰，同時檢測火焰燃燒發出的紫外和紅外光譜，并對光譜頻率、強度、持續時間進行算法模型分析，使得探測器對于各種誤報警源具備高度的免疫能力。

梅思安MSA FlameGard 5 UV/IR 紫外紅外火焰探測器正品現貨

產品特點和優勢：

相比較單紅外火焰探測器，更加適用于高溫背景環境，并擁有更高的可靠性。

業界最寬廣的檢測視角（120°），更強大的火焰檢測覆蓋能力。

連續光路自檢功能（COPM）每一分鐘持續監測光路和內部電路的完整性。

CCC強制性認證， 單一配置即可達到SIL3安全等級認證。

寬廣的工作溫度（-40℃ ~+85℃），勝任更加嚴酷工況。

標配Modbus和HART接口，以及提供全面的故障和火焰報警歷史事件記錄。

梅思安MSA FlameGard 5 UV/IR 紫外紅外火焰探測器正品現貨

訂貨號：

5UVIR-1072  紫外紅外火焰探測器，CCCF，HART,Modbus,SIL3, 鋁合金。

產品詳情 產品詳情 訂貨指南 訂貨指南 相關產品 相關產品

FlameGard 5 UV/IR 火焰探測器可持續監測所有碳氫物燃燒火災和火焰發出的紫外和紅外輻射。當探測到輻射時，FlameGard5火焰探測器驅動繼電器信號，指示有火災或火焰存在。此繼電器可作為火災報警回路的一部分或直接連接至DCS。

工作原理: 雙重紫外和紅外波長光學傳感技術

Product Information

The FlameGard? 5 UV/IR Flame Detector is designed to detect fires and provide alarm outputs directly from the detector while maintaining false alarm immunity.

The FlameGard? 5 UV/IR Flame Detector detects fires by monitoring in both the ultraviolet and infrared (UV & IR) spectral ranges, making it highly immune to false alarms caused by lightning, arc welding, hot objects and other sources of radiation.

Other features of the FlameGard? 5 UV/IR Detector include three alarm/fault relays, and an RS-485 serial output with Modbus RT protocol for linking up to 128 detectors in series or 247 with repeaters. The RS-485 and HART outputs provide status, alarm, fault and other information for operation, troubleshooting or programming of the units. HART enables this feature without the need for rewiring.

The continuous optical path monitoring (COPM) self test feature checks both the optical path integrity (window cleanliness) and the detector’s electronic circuitry once every minute.

梅思安MSA FlameGard 5 UV/IR 紫外紅外火焰探測器正品現貨

Features & Benefits:

·         Wide field of view enables greater fire detection coverage

·         Event logging stores fault and alarm history

·         4-20 mA stepped output is the industry standard for remote alarm and fault indication

·         Modbus and HART user interface provides complete status and control capability in the control room

·         Wide operating temperature range permits operation at higher ambient temperature

·         Continuous Optical Path Monitoring (COPM) checks the optical path integrity and the detector’s electronic circuitry once every minute

·         Three SPDT high-current programmable relay outputs provide immediate and time-delayed relay outputs for alarm, warning and fault conditions

Related Products:

·         FlameGard? 5 MSIR Flame Detector

·         FlameGard? 5 UV/IR-H2 Flame Detector

·         FlameGard? 5 Test Lamp