產品介紹： 

·該鋸適用于危險的工作環境，可在較高溫的環境下作業，無火花，在潮濕的環境中無漏電危險，是一款性能可靠、安全型及效率極高的理想風動工具之一。廣泛用于采礦、石化、建筑等行業。 

·利用井下壓風管道系統作為動力源。重量輕，易攜帶；結構科學，便于作業。 

·可快速切割管道、電纜、角鋼、結構鋼、U型鋼、鏈條、錨桿、錨索等。 

·錮金屬鋼合金超級鋸條，耐高溫、耐摩擦、使用壽命長。非常適用于鋸割不銹鋼、鎳基合金、鐵、銅、鋁、玻璃、塑料、木材等。技術參數： 

聯系人金經理電話13934240041

使用方法：

1、了解所需切割的材料，如有必要可以通過降低空氣壓力來降低鋸片的轉動速度。 

2、確保牢固固定了所需切割的材料，防止其移動。 

3、氣動空氣馬達時，用手指按壓閥桿，然后開始切割。 

4、用鋸的重量來控制切割壓力。對于較軟的材料來說，這樣的重量已經足夠。過多的壓力會降低鋸片的速度。對于較硬的材料，可以通過加壓的方式來降低鋸片的轉動速度。切割是保持鋸筆直。鋸片的任何扭曲或歪斜都可能降低其使用壽命。（注意：避開切割后可能掉落的碎片。切割即將完成時，切勿使鋸碰到您的身體、工件或附近的其它人員。） 

5、關閉空氣馬達時，釋放閥桿。 

6、下次切割開始前，鋸片必須保持運動狀態。氣動鋸時，鋸片不能接觸任何表面。 

7、斷開空氣軟管時，關閉空氣軟管閥。斷開前，先打開空氣閥給軟管減壓。 

8、更換鋸片前，務必斷開空氣軟管，并推動閥桿以釋放掉馬達內的壓力。 

9、順時針轉動調整手柄以便釋放鋸片導桿上的張力。然后釋放側面板的鎖以便打開側面板。然后從驅動輪上取下鋸片并將其從鋸帶導桿上松開。

山東棗莊FDJ-120方剛切割鋸報價

聯系人金經理電話13934240041

河南平頂山市煤礦井下氣動切割鋸氣動煤礦防爆U型鋼切割鋸寧夏煤礦井下錨索切割機礦用煤炭切割機鋼管U型鋼切割鋸遼寧撫順市煤礦井下氣動切割鋸礦用煤炭切割機鋼管U型鋼切割鋸江蘇南京礦用工字鋼切割鋸鋼管角鋼切割鋸山西長治市氣動鋁合金鋼材切割鋸礦用風動鋼管U型鋼切割氣動風動切割鋸四川成都煤礦井下氣動切割鋸氣動帶鋸手持式無火花切割鋸河南煤礦井下氣動切割鋸手持式無火花切割鋸河南氣動切割鋸配件H鋼工字鋼快速切割鋸方管切割鋸內蒙古東勝市氣動鋁合金鋼材切割鋸手提式氣動工字鋼無火花礦用切割鋸河南煤礦井下錨索切割機U型鋼工字鋼風動切割鋸新疆哈密市礦用工字鋼切割鋸FDJ-220進口風動切割鋸工字鋼切割氣動鋸貴州貴陽礦用U型鋼切割鋸小型輕軌切割鋸江西無火花切割鋸廠家礦用錨索錨桿氣動帶鋸內蒙陜西氣動切割鋸配件礦用氣動切割鋸切鐵鋸參數山西周邊煤礦井下氣動切割鋸手持式無火花切割鋸新疆烏魯木齊氣動切割鋸配件礦用錨桿錨索切割鋸福建寧夏氣動鋁合金鋼材切割鋸手提式氣動切割鋸礦用大功率工字鋼切割鋸山東濟南無火花切割鋸廠家FDJ-120工字鋼氣動風動無火花切割鋸供應河南平頂山市無火花切割鋸廠家高瓦斯防爆切割鋸黑龍江七臺河氣動鋁合金鋼材切割鋸陽泉礦用氣動切割鋸廠家U型鋼切割鋸吉林遼源市煤礦井下切割鋸鋸條太原切割鋸生產手持式無火花礦用切割鋸新疆礦用工字鋼切割鋸FDJ-120礦用大功率工字鋼切割鋸四川眉山礦用U型鋼切割鋸新型石油管道切割鋸

ommodity introduction:
The FDJ-120 type pneumatic cutting saw is suitable for the risk working environment. It can operate in a high temperature environment, no sparks, and no leakage risk in humid environment. It is a reliable, safe and highly efficient aspiration pneumatic thing. It is widely used in mining, petrochemical, construction and other professions.
Use the downhole air pressure pipe system as a power source. The weight is light and easy to be carried; it is scientific and easy to work. Si Li Zhen FDJ-120/ mine explosion-proof cutting saw
Open pipe, cable, angle steel, structural steel, U type steel, chain, bolt, anchor cable and so on.
- Han metal steel alloy saw blade, high temperature resistance, long life, the use of conflict. It is suitable for sawing stainless steel, nickel base alloy, iron, copper, aluminum, glass, plastic, wood and so on.
Technical parameters:
Type of type power consumption cut width cut width (diameter) speed weight of saw blade
FDJ-120 0.5KW 0.6m3/min three saws:
0 - 30mm
30 - 50mm
50 - 120mm 120mm 60m/min 6kg
FDJ-180 1.0kw 1.2m3/min 180mm 90m/min 10kg
FDJ-230 1.5kw 1.5m3/min 230mm 120m/min 16KG
Primary incision range:
The FDJ-120/220/230 pneumatic cut saw used the downhole pressure pipe system as a power source.
Light weight, easy to take; construction of science, easy to work.
The pipeline, cable, angle steel, structural steel, U type steel, chain, bolt, anchor cable and so on can be cut off quickly.
Super - Han metal steel alloy saw blade, high temperature resistance, long life, the use of conflict.
Widely used in natural gas, coal mine, petrochemical, construction and other professions.
Pneumatic pneumatic cut saw application method:
1. Knowing the material that needs to be cut, it is necessary to reduce the speed of the saw blade by reducing the pressure of the air. Longting District FDJ-120 mine pneumatic cutting saw
2. It is true that the health-care stout has fixed the required cut materials to prevent it from moving.
3. When pneumatic air motor, press the stem with the finger, and then cut it initially.
4, the cutting pressure is controlled by the weight of the saw. This weight is now satisfactory for softer materials. Too much pressure can reduce the speed of the saw blade. For harder materials, the speed of the saw blade can be reduced by pressure.  The incision is to keep the saws straight. Saw any distortion or skew can reduce the use of life. (notice: avoid debris that can fall after a cut. When the cut is about to end, do not make the saw touch your body, the workpiece, or the other people in the neighborhood.
5. When the air motor is closed, the stem is released.
6. Before the next incision, it is necessary to adhere to the movement of the saw blade. The saw blade can't contact any surface when a pneumatic saw. Yanshi city FDJ-120/ mine explosion-proof cutting saw
7. When the air hose is disconnected, the air hose valve is closed. Before disconnecting, open the air valve and decompress the hose.
8. Before replacing the saw, it is necessary to disconnect the air hose and push the stem to release the pressure of Madane.
9, adjust the handle clockwise to release the tension on the sawing guide rod. Then release the lock of the side panel so as to open the side panel. Then remove the blade from the drive wheel and release it from the sawing guide rod.
Note:
All power things may be very risky. Please follow the following safety procedures in order to maintain yourself.
1, wear goggles, gloves, safety boots and protective clothing.
2, time to adhere to the feet of stability, balance. Xuchang city mine / small portable pneumatic cutting saw
3, medical treatment, alcohol or drugs do not operate the things.
4. Before placing the machine, turn off the machine first (closed valve).
5. After the machine stops working, the supply of gas should be cut off immediately to prevent the machine from launching under the unconsciousness.
6. Do not stand on the ladder or operate on the scaffolding. Please stay away from the operation area.
7, operation to launch a clamp, should first remove the hose. Turn off the main valve. To release the compressed gas, then turned away from the valve.
8, hold the machine with both hands. Keep the rest of your hands and body away from the open area.
9, the motor must be turned off before transporting the machine and the gas source is cut off.
10, pay attention to the debris that may fall.