- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
INCONEL 601? 焊絲
INCONEL 601 焊絲是用鎢極氣體保護焊（GTAW）焊接INCONEL 601合金的首選焊絲。應用INCONEL 601 焊絲的GTAW焊接方法是在超過1150℃的高溫環境下或在溫度較低但卻暴露在硫化氫或二氧化硫環境下焊接INCONEL 601合金的唯一推薦方法。同時，這種焊絲形成的焊縫金屬具有與母材相等的抗腐蝕與抗氧化性能。
|
AWS A5.14,ERNiCrFe-11 Werkstoff Nr.2.4626 ASME Ⅱ,SFA-5.14,ERNiCrFe-11 UNS N06601 規格 ASME Ⅸ,F-No.43 ISO SNi6601 DIN1736 SG-NiCr23Al Europe NiCr23Fe15Al
|
|
Ni----------58.0-63.0 Mn -------- 1.0max 化學 Cr ---------21.0-25.0 S ----------0.015 max 成份 Fe ---------剩余 Si----------0.50 max Al -------- 1.0-1.7 Cu----------1.0 max C -------- 0.10 max 其它 ------ 0.50 max
|
|
a 添加Co 典型 拉伸強度，psi 94,000 機械 MPa 648 性能 延伸率，(4d）% 42
|
焊絲可以以線卷或直線狀供貨，并有幾種不同直徑以供選擇，如下表所示：
產品
|
mm |
0.8 |
0.9 |
1.0 |
1.14 |
1.2 |
1.6 |
2.4 |
3.2 |
|
in |
0.030 |
0.035 |
0.040 |
0.045 |
0.047 |
0.062 |
0.093 |
0.125 |
供貨
狀態
直線長度--915 mm(36”)或1000 mm(39”)
INCONEL 601 welding wire is the preferred electrode for welding INCONEL 601 alloy with tungsten gas welding (GTAW). INCONEL 601 wire GTAW welding method is in more than 1150 ℃ high temperature conditions or in low temperature but exposed to hydrogen sulfide or sulfur dioxide welding INCONEL 601 alloy the only recommended way. At the same time, the weld metal formed by the wire has the same anti-corrosion and antioxidant properties as the mother material.
AWS A5.14 ERNiCrFe - 11 Werkstoff Nr. 2.4626
ASME Ⅱ, SFA - 5.14, UNS N06601 ERNiCrFe - 11
ASME specifications Ⅸ, F - No. 43 ISO SNi6601
DIN1736 SG - NiCr23Al Europe NiCr23Fe15Al
Ni -- -- -- -- -- -- -- -- -- - 58.0-63.0 Mn -- -- -- -- -- -- -- -- 1.0 Max
Chemical Cr -- -- -- -- -- -- -- -- -- 21.0 25.0 S -- -- -- -- -- -- -- -- -- -- 0.015 Max
Ingredients Fe -- -- -- -- -- -- -- -- -- remaining Si -- -- -- -- -- -- -- -- -- -- 0.50 Max
(1) -- -1.0-1.7 Cu------ -1.0max
C ------ -0.10 Max -- -0.50 Max
Add a Co
Typical tensile strength, psi 94,000
Mechanical 648 MPa
Performance elongation, (4d) % 42
The wire can be supplied in a reel or straight line, with several different diameters for selection, as shown in the following table:
products
Mm 0.8 0.9 1.0 1.14 1.2 2.4 3.2
In 0.030 0.035 0.040 0.045 0.035 0.062 0.093 0.125
supply
state
Linear length -915 mm(36 ") or 1000 mm (39)
