歐洲廠家 PCH1072/CHF8081

Automation Direct HMA-12M NITRA cylinder male adapter, stainless steel, M5 x 0.8 thread. For use with 12 mm H-series cylinders. Hex nut included.
Automation Direct HMA-16M NITRA cylinder male adapter, stainless steel, M6 x 1.0 thread. For use with 16 mm H-series cylinders. Hex nut included.
Automation Direct HMA-20M NITRA cylinder male adapter, stainless steel, M8 x 1.25 thread. Hex nut included. For use with 20 mm H-series cylinders.
Automation Direct HMA-25M NITRA cylinder male adapter, stainless steel, M10 X 1.25 thread. For use with 25 mm H-series cylinders. Hex nut included.
Automation Direct HMA-32M NITRA cylinder male adapter, stainless steel, M14 x 1.5 thread. For use with 32 mm H-series cylinders. Hex nut included.
Automation Direct HMA-40M NITRA cylinder male adapter, stainless steel, M14 x 1.5 thread. For use with 40 mm H-series cylinders. Hex nut included.
Automation Direct HMA-50M NITRA cylinder male adapter, stainless steel, M18 x 1.5 thread. For use with 50 mm H-series cylinders. Hex nut included.
Automation Direct HMA-63M NITRA cylinder male adapter, stainless steel, M18 x 1.5 thread. For use with 63 mm H-series cylinders. Hex nut included.
Automation Direct HMA-80M NITRA cylinder male adapter, stainless steel, M22 x 1.5 thread. For use with 80 mm H-series cylinders. Hex nut included.
Automation Direct HMA-100M NITRA cylinder male adapter, stainless steel, M26 x 1.5 thread. For use with 100 mm H-series cylinders. Hex nut included.
Automation Direct HFC-12M NITRA cylinder rear clevis bracket, aluminum. For use with 12 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-16M NITRA cylinder rear clevis bracket, aluminum. For use with 16 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-20M NITRA cylinder rear clevis bracket, aluminum. For use with 20 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-25M NITRA cylinder rear clevis bracket, aluminum. For use with 25 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-32M NITRA cylinder rear clevis bracket, cast iron. For use with 32 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-40M NITRA cylinder rear clevis bracket, cast iron. For use with 40 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-50M NITRA cylinder rear clevis bracket, cast iron. For use with 50 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-63M NITRA cylinder rear clevis bracket, cast iron. For use with 63 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-80M NITRA cylinder rear clevis bracket, cast iron. For use with 80 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct HFC-100M NITRA cylinder rear clevis bracket, cast iron. For use with 100 mm H-series cylinders. Mounting hardware和pivot pin included.
Automation Direct PRODUCT GROUP NITRA Pneumatic T-Slot Cylinder Switches
Automation Direct CPS9H-AP-A Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9H-AN-A Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9H-AP-F Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9H-AN-F Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS-AP-F Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 10-30 VDC, PNP output, status LED, 0.3 meter  cable with M8 connector.
Automation Direct CPS-CP-F Pneumatic cylinder switch, for position sensing, magnetic, square, NC, 3-wire, 10-30 VDC, PNP output, status LED, 0.3 meter  cable with M8 connector.
Automation Direct CPS-AN-F Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 10-30 VDC, NPN output, status LED, 0.3 meter  cable with M8 connector.
Automation Direct CPS-AP-A Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 10-30 VDC, PNP output, status LED, 2 meter  pigtail with wire leads.
Automation Direct CPS-CP-A Pneumatic cylinder switch, for position sensing, magnetic, square, NC, 3-wire, 10-30 VDC, PNP output, status LED, 2 meter  pigtail with wire leads.
Automation Direct CPS-AN-A Pneumatic cylinder switch, for position sensing, magnetic, square, NO, 3-wire, 10-30 VDC, NPN output, status LED, 2 meter  pigtail with wire leads.
Automation Direct CPSF-AP-H Pneumatic cylinder switch, for position sensing, magnetic, square, IP69K, NO, 3-wire, 10-30 VDC, PNP output, status LED, 0.3 meter  cable with M12 connector.
Automation Direct CPSF-AP-A Pneumatic cylinder switch, for position sensing, magnetic, square, IP69K, NO, 3-wire, 10-30 VDC, PNP output, status LED, 2 meter  pigtail with wire leads.
Automation Direct CPS9F-AP-A Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9F-AN-A Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9F-AP-F Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9F-AN-F Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9Q-AP-A Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9Q-AN-A Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9Q-AP-F Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9Q-AN-F Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9T-AP-A Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9T-AN-A Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9T-AP-F Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9T-AN-F Pneumatic cylinder switch, for position sensing, magnetic, rectangular, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct PRODUCT GROUP NITRA Pneumatic Round Cylinder Switches
Automation Direct CPS9C-AP-A Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9C-AN-A Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9C-AP-F Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9C-AN-F Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9M-AP-A Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9M-AN-A Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9M-AP-F Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9M-AN-F Pneumatic cylinder switch, for position sensing, magnetic, round, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct PRODUCT GROUP NITRA Pneumatic Dovetail Cylinder Switches
Automation Direct CPS9D-AP-A Pneumatic cylinder switch, for position sensing, magnetic, dovetail, NO, 3-wire, 5-28 VDC, PNP output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9D-AN-A Pneumatic cylinder switch, for position sensing, magnetic, dovetail, NO, 3-wire, 5-28 VDC, NPN output, status LED, 9.8 ft.  pigtail with wire leads.
Automation Direct CPS9D-AP-F Pneumatic cylinder switch, for position sensing, magnetic, dovetail, NO, 3-wire, 5-28 VDC, PNP output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct CPS9D-AN-F Pneumatic cylinder switch, for position sensing, magnetic, dovetail, NO, 3-wire, 5-28 VDC, NPN output, status LED, 0.5 ft.  cable with M8 connector.
Automation Direct PRODUCT GROUP NITRA Pneumatic Cylinder Switch Accessories
Automation Direct CPSB-07 Mounting band, secures a 5mm square cylinder position switch to a 5/16 or 7/16 inch (8 or 10 mm) bore round body cylinder.
Automation Direct CPSB-14 Mounting band, secures a 5mm square cylinder position switch to a 9/16, 3/4 or 7/8 inch (12, 16 or 20 mm) bore round body cylinder.
Automation Direct CPSB-20 Mounting band, secures a 5mm square cylinder position switch to a 1-1/16 or 1-1/4 inch (25 or 32 mm) bore round body cylinder.
Automation Direct CPSB-24 Mounting band, secures a 5mm square cylinder position switch to a 1-1/2 inch (40mm) bore round body cylinder.
Automation Direct CPSB-32 Mounting band, secures a 5mm square cylinder position switch to a 1-3/4 or 2 inch (50mm) bore round body cylinder.
Automation Direct CPSB-40 Mounting band, secures a 5mm square cylinder position switch to a 2-1/2 inch (63mm) bore round body cylinder.
Automation Direct CPSB-52 Mounting band, secures a 5mm square cylinder position switch to a 3 or 3-1/4 inch (80mm) bore round body cylinder.
Automation Direct CPSB-64 Mounting band, secures a 5mm square cylinder position switch to a 4 inch (100mm) bore round body cylinder.
Automation Direct CPSS-07 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 5/16 or 7/16 inch (8 or 10 mm) bore round body cylinder.
Automation Direct CPSS-14 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 9/16, 3/4 or 7/8 inch (12, 16 or 20 mm) bore round body cylinder.
Automation Direct CPSS-20 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 1-1/16 or 1-1/4 inch (25 or 32 mm) bore round body cylinder.
Automation Direct CPSS-24 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 1-1/2 inch (40mm) bore round body cylinder.
Automation Direct CPSS-32 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 1-3/4 or 2 inch (50mm) bore round body cylinder.
Automation Direct CPSS-40 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 2-1/2 inch (63mm) bore round body cylinder.
Automation Direct CPSS-52 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 3 or 3-1/4 inch (80mm) bore round body cylinder.
Automation Direct CPSS-64 Mounting band, stainless steel, secures a 5mm square cylinder position switch to a 4 inch (100mm) bore round body cylinder.
Automation Direct CPSA-03 Adapter bracket, secures a 5mm square cylinder position switch to a 1/8 to 3/16 inch (3 to 5 mm) diameter tie rod.
Automation Direct CPSA-04 Adapter bracket, secures a 5mm square cylinder position switch to a  3/16 to 1/4 inch (5 to 7 mm) diameter tie rod.
Automation Direct CPSA-07 Adapter bracket, secures a 5mm square cylinder position switch to a 3/16 to 7/16 inch (5 to 11 mm) diameter tie rod.
Automation Direct CPSA-09 Adapter bracket, secures a 5mm square cylinder position switch to a 3/8 to 9/16 inch (9 to 15 mm) diameter tie rod.
Automation Direct CPSA-12 Adapter bracket, secures a 5mm square cylinder position switch to a 9/16 to 3/4 inch (14 to 20 mm) diameter tie rod.
Automation Direct CPS9D-D12M Dovetail groove adapter, mounts a CPS9D cylinder position switch in a 12mm 60 degree dovetail slot.
Automation Direct CPS9D-D38 Dovetail groove adapter, mounts a CPS9D cylinder position switch in a 3/8 inch 60 degree dovetail slot.
Automation Direct CPS9D-D14M Dovetail groove adapter, mounts a CPS9D cylinder position switch in a 14mm 60 degree dovetail slot.
Automation Direct PRODUCT GROUP NITRA 1/8 inch Pneumatic Straight Polyurethane (PUR) Tubing
Automation Direct PU18BLK100 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, black, 100 ft package.
Automation Direct PU18BLK500 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, black, 500 ft reel.
Automation Direct PU18BLU100 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, blue, 100 ft package.
Automation Direct PU18BLU500 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, blue, 500 ft reel.
Automation Direct PU18CLR100 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, clear, 100 ft package.
Automation Direct PU18CLR500 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, clear, 500 ft reel.
Automation Direct PU18RED100 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, red, 100 ft package.
Automation Direct PU18RED500 NITRA pneumatic tubing, ether-based polyurethane, 1/8 inch outside diameter, 0.062 inch inside diameter, red, 500 ft reel.