- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
KCD2-UT2-Ex1倍加福溫度安全柵，現貨供應，提供技術支持，歡迎來電咨詢。
| 產品闡述 | ||
|---|---|---|
| Current output 0/4 mA ... 20 mA | ||
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 | |
| Supply | ||
| Connection | terminals 9+, 10- or power feed module/Power Rail | |
| Rated voltage | 19 ... 30 V DC | |
| Ripple | within the supply tolerance | |
| Power dissipation/power consumption | ≤ 0.98 W / 0.98 W | |
| Interface | ||
| Programming interface | programming socket | |
| Input(KCD2-UT2-Ex1倍加福溫度安全柵) | ||
| Connection side | field side | |
| Connection | terminals 1, 2, 3, 4 | |
| RTD |
type Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995) type Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94) type Cu10, Cu50, Cu100 (P50353-92) type Ni100 (DIN 43760) |
|
| Measuring current | approx. 200 μA with RTD | |
| Types of measuring | 2-, 3-, 4-wire connection | |
| Lead resistance | max. 50 Ω per line | |
| Measurement loop monitoring | sensor breakage, sensor short-circuit | |
| Thermocouples |
type B, E, J, K, N, R, S, T (IEC 584-1: 1995) type L (DIN 43710: 1985) type TXK, TXKH, TXA (P8.585-2001) |
|
| Cold junction compensation | external and internal | |
| Measurement loop monitoring | sensor breakage | |
| Potentiometer | 0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection) | |
| Voltage | selectable within the range -100 ... 100 mV | |
| Input resistance | ≥ 1 MΩ (-100 ... 100 mV) | |
| Output(KCD2-UT2-Ex1倍加福溫度安全柵) | ||
| Connection side | control side | |
| Connection | terminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+) | |
| Output | Analog current output | |
| Current range | 0 ... 20 mA or 4 ... 20 mA | |
| Fault signal | downscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43) | |
| Source |
load 0 ... 550 Ω open-circuit voltage ≤ 18 V |
|
| Sink |
Voltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V, series resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage. The maximum value of the resistance is (V - 5)/0.0215 Ω. |
|
| Transfer characteristics | ||
| Deviation | ||
| After calibration |
Pt100: ± (0.06 % of measurement value in K + 0.1 % of span + 0.1 K (4-wire connection)) thermocouple: ± (0.05 % of measurement value in °C + 0.1 % of span + 1.5 K (1.7 K for types R and S)) this includes ± 1.3 K error of the cold junction compensation mV: ± (50 μV + 0.1 % of span) potentiometer: ± (0.05 % of full scale + 0.1 % of span, (excludes errors due to lead resistance)) |
|
| Influence of ambient temperature |
deviation of CJC included: Pt100: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔTamb*) thermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔTamb*) mV: ± (0.01 % of measurement value + 0.006 % of span)/K ΔTamb*) potentiometer: ± 0.006 % of span/K ΔTamb*) *) ΔTamb = ambient temperature change referenced to 23 °C (296 K) |
|
| Influence of supply voltage | < 0.01 % of span | |
| Influence of load | ≤ 0.001 % of output value per 100 Ω | |
| Reaction time |
worst case value (sensor breakage and/or sensor short circuit detection enabled) mV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s |
|
| Galvanic isolation | ||
| Output/supply, programming input |
functional insulation, rated insulation voltage 50 V AC There is no electrical isolation between the programming input and the supply. The programming cable provides galvanic isolation so that ground loops are avoided. |
|
| Indicators/settings | ||
| Display elements | LEDs | |
| Configuration | via PACTware | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2011 | |
| Degree of protection | IEC 60529:2001 | |
| Protection against electrical shock | UL 61010-1:2004 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals | |
| Mass | approx. 100 g | |
| Dimensions | 12.5 x 114 x 124 mm (0.5 x 4.5 x 4.9 inch) , housing type A2 | |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
KC系列倍加福安全柵
KCD2-UT2-Ex1
KCD2-SR-1.LB
KCD2-STC-Ex1
KCD2-RR-Ex1
KCD2-SR-Ex1.LB
KCD2-SR-EX2
KCD2-SCD-1
KCD2-SCD-Ex1
KCD2-STC-1
KCD2-UT2-1
KCD2-STC-1.2O
KCD2-STC-Ex1.2O
KF系列倍加福安全柵
KFD2-STC4-EX1
KFD2-STC4-EX1.2O
KFD2-STC4-EX2
KFD2-SR2-EX1.W
KFD2-SR2-EX2.W
KFD2-SR2-EX1.W.LB
KFD2-SCD-EX1.LK
KFD2-SCD2-EX1.LK
KFD2-SCD2-EX2.LK
KFD2-CD-EX1.32
KFD2-UT2-EX1
KFD2-UT2-EX2
KFD2-STC4-1
KFD2-STC4-2
KFD2-STC4-1.2O
K-ADP-USB
倍加福浪涌保護器
K-LB-1.30G K-LB-2.30G K-LB-1.6G K-LB-2.6G K-LB-1.30 K-LB-2.30 K-LB-1.6 K-LB-2.6
FN-LB-I FP-LB-I FS-LB-I M-LB-1.150.D M-LB-2.150TN.D M-LB-3.150TNC.D M-LB-4.150TNS.D M-LB-1.275.D M-LB-2.275TN.D
M-LB-3.275TNC.D M-LB-4.275TNS.D M-LB-4.275TT.D M-LB-1.150.M M-LB-1.275.M
倍加福常年庫存如下：
編碼器系列：
PVM58N-011AGR0BN-1213
PVM58N-032AGR0BN-1213
PVM58N-021AGR0BN-1213
PVM58N-022AGR0BN-1213
PVM58N-011AZR0BN-1213
PSM58N-F3AAGR0BN-1213
FVS58N-011K2R3GN-0013
PVM58N-011AGR0BN-1213
PVI58N-011AGR0BN-1213
RVI50N-09BK0A3TN-01000
RHI90N-0HAK1R61N-01024
RHI90N-0HAK1R61N-01024
RVI50N-09BK0A3TN-01000
RVI58N-011K1R61N-01024
30-4201_A-2000
14-14366-1024
傳感器系列：
P+F NBB10-30GM50-E0
P+F NBB10-30GM50-E2
P+F NBB15-30GM50-E2
P+F NBB15-30GM50-E2-V1
P+F NBB15-30GM50-E2-M
P+F NBB15-30GM50-WO
P+F NBB15-30GM50-W0
P+F NBB15-U1-E2
P+F NBB20-U1-E2
P+F NBB20-L2-E2-V1
P+F NBB20-L2-A2-C-V1
P+F NBB2-12GM50-E2-V1
P+F NBN3-8GM30-E2
P+F NBB4-12GM50-E0
P+F NBN4-12GM40-E2
P+F NBB4-12GM50-E0-V1
P+F NBB4-12GM50-E2
P+F NBB4-12GM50-E2-V1
P+F NBB5-18GM50-E0
P+F NBB5-18GM50-E2
P+F NBB5-18GM50-E2-V1
P+F NBB8-18GM50-E0
P+F NBB8-18GM50-E2
P+F NBB8-18GM50-E2-V1
P+F NBN15-30GM40-Z0
P+F NBN15-30GM40-Z0-V1
P+F NBN15-30GM50-E2
P+F NBN15-30GM50-E2-V1
P+F NBN30-U1-E0
P+F NBN30-U1-E2
P+F NBN40-U1-E2
P+F NBN4-12GM50-E0
P+F NBN4-12GM50-E2
P+F NBN4-12GM50-E2-V1
P+F NBN5-F7-E0
P+F NBN8-18GM50-E2
P+F NBN8-18GM60-WO
P+F NBN8-18GM60-W0
P+F NCB15-30GM50-Z4
P+F NCB2-12GM35-N0
P+F NCB5-18GM40-N0-V1
P+F NCB5-18GM40-Z0
P+F NCB50-FP-E2-P1
P+F NCN50-FP-Z2-P1
P+F NCN15-30GM40-Z1
P+F NCN4-12GM40-Z0
P+F NJ1.5-8GM-N
P+F NJ20+U1+A2
P+F NJ2-11-N 106377
P+F NJ2-12GM40-E2-V1
P+F NJ5-18GM-N
P+FLA28/LK28-Z-F1/31/116
P+FLA31/LK31/25/31/115
P+FLA39/LK39-Z/31/40A/116
P+F OBE10M-18GM60-SE
P+F OBS4000-18GM60-E5
P+F OBT200-18GM60-E4
P+F OBT200-18GM60-E5
P+F OBT500-18GM60-E4
P+F OBT500-18GM60-E5
P+F UB1000-18GM75-E6-V15
P+F NCB15-30GM50-Z4-V1
P+F NBB0.6-3M22-E2
P+F NBN3-F31-E8-V1
P+F NCN4-12GM60-B3-C2-V1
P+F 3RG4013-0AG01-PF
P+F UB500-F42S-E5-V15
P+F NBN40-U1K-N0
P+F NBN40-U1K-N0-V1
P+F M11/MV11-Ex/40b/112
P+F NBB2-6.5M25-E2-V3 NBB2-6,5M25-E2-V3
P+F ML5-6/32/115
P+F ML5-8-400/32/115
P+F NCB15-30GM50-Z4-V1
P+F NJ1.5-6.5-N
P+F NBN15-30GM60-A2
P+F NCB15-30GM40-NO NCB15-30GM40-N0
