筆記本裝訂機廠家工廠價格報價

臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 校正系統 Adjust system

The system is implemented using a adjust pin on the cylinder drive link mechanism (Picture 7). According to the product of the different correction needle position angle number can be adjusted according to demand. To ensure the accuracy and stability of the equipment. 

臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 繞線穿線系統 Forming and binding system

  該系統由供線系統、繞制成型機構、夾緊機構、裁剪機構、冷卻系統組成。機械手將產品送至該工位后，夾緊機構夾緊，然后繞制成型機構旋轉并將成型的鐵絲穿入待裝訂的產品中，同時在繞線治具處進行風冷，然后通過裁剪機構將線剪斷，夾緊機構松開，機械手4將產品移至下一工位。

根據產品的大小不一所需穿線的長短不一可通過調節裁剪機構中兩剪刀的間距來達到要求，繞線的節距變更可通過更換不同節距的治具來實現，大大提高了設備的使用價值（見圖八）。

The system consists of supply wire system, wire forming structure, clamping structure, cutting structure, cooling system. After the gripper sends the product to the station, the clamping structure clamp and then rotated around the forming structure and the shaped wire is inserted into the product that are waiting for binding, while air-cooled at the wire fixture, The cutting structure will cut the wire and the clamping structure is released, and the gripper 4 moves the product to the next station.

Depending on the size of the product, the length of the metal wire may vary by adjusting the spacing of the two scissors in the cutting structure. The change in the pitch of the winding can be achieved by changing the fixture of different pitch, greatly improving the equipment Use value

河南省

鄭州市  南陽市  新鄉市  安陽市  洛陽市  信陽市  平頂山市  周口市  商丘市  開封市  焦作市  駐馬店市  濮陽市  三門峽市  漯河市  許昌市  鶴壁市  濟源市