臺歷裝訂機廠家工廠價格報價

臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 獨立的收放物料裝置  Feed and Receive belt

  本機配置的放料裝置是一款放料寬度可調的鏈傳動機構?？筛鶕a品的寬度調節好合適的料道寬度，人工將產品放入料道，通過傳動機構將產品傳送到沖孔待料位。在此工位放料大大提高了設備的安全性能（見圖九）。

The machine is equipped with a discharge device with adjustable width of material. Can be adjusted according to the width of the product, the product will be manually put into the belt, through the transmission device will be sent to the punching position to be expected. In this station discharge material greatly improved the safety performance of the equipment (Picture 9). 

收料裝置主要是配合主機機械手4完成收料工作，可根據主機的裝訂速度自動調整線體的每次位移（見圖三）。

Receiving belt is mainly with the host gripper 4 to complete the receipt work, according to the host's binding speed automatically adjust the line of each displacement (Picture 3).

臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 的操作及更換零部件折卸方法 Testing and running 

1．安全操作注意事項 Notice of safety operate
1.1臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機操作機器以前，必須仔細閱讀本機器說明書。

Before operating the machine, you must read the machine manual carefully.

1.2 了解臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 各部分的作用和潛在危險區域，知道必要的安全措施。

Understand the role of the various parts of the machine and potentially dangerous areas, and know the necessary safety measures

1.3 啟動臺歷裝訂機 掛歷裝訂機 日歷裝訂機 筆記本裝訂機 器前，檢查機器各手柄，按鈕是否處于預定的工作位置。

Before starting the machine, check the handle of the machine and whether the button is in the intended working position. 

如果機器工作時突然停止，不要馬上重新啟動，應該按下“總?！弊枣i按鈕，檢查停機原因，待故障排除后方可重新啟動。                 If the machine suddenly stops working, do not restart immediately, you should press the "total stop" self-locking button, check the cause of the shutdown, to be troubleshooting before you can restart. 

河南省

鄭州市  南陽市  新鄉市  安陽市  洛陽市  信陽市  平頂山市  周口市  商丘市  開封市  焦作市  駐馬店市  濮陽市  三門峽市  漯河市  許昌市  鶴壁市  濟源市