JBC-DS360-A小型吸錫手柄

產品價格：	3200/人民幣
最后更新：	2018-12-13 16:46:25
產品產地：	西班牙
發貨地：	貴州貴陽市 (發貨期：當天內發貨)
供應數量：	不限
有效期：	長期有效
最少起訂：	1
瀏覽次數：	266

公司基本資料信息

貴州海躍通機電科技有限公司
左應海先生銷售經理
會員[試用會員產品]
郵件1113585224@qq.com
手機18198634546
電話
傳真
地址貴州省貴陽市觀山湖區長嶺北路金融城max-b座12-22

產品詳細說明

1. Low Temperature Soldering:?
High Power / mass ration tips and integrated?
heater / thermocouple delivers the best thermal?
recovery in the market along with lower soldering?
temperatures.
2. Read & Feed:
We use one wire buried deep in the tip of the?
copper to “read & feed.” Our thermocouple?
and heating element are one in the same and?
are microprocessor driven over a sensor at 60?
hertz (60x a second) utilizing up to 140 watt?
transformer. This is why our thermal performance?
cannot be matched.
3. Initial Heat Up:
A conventional station takes between 10 to 90?
seconds to reach 360° C. Any JBC station with?
a T210 hand piece reaches this temperature in?
only two seconds.
4. Outstanding Tip Life:
Lasting up to five times longer as soon as?
the soldering iron is left in the stand, the tip?
temperature automatically drops to 200° C,?
decreasing oxidation and wear. Resulting in a?
working life three to five times longer than that?
of the conventional tip. When the soldering iron?
is taken out of the stand again, the working?
temperature is instantaneously reached.?
NOTE: It varies by tip geometry, temperature?
settings, solder, flux, and the person using it;?
However generally, it ranges between 25,000?
and 100,000 solder joints.
5. Quick Change Over Tips:
No tools needed to change the tip. Just place in?
holder, pull and insert the new tip. Reduces your?
idle time while increasing operator safety.
6. Ergonomic Design:
The JBC soldering iron are currently the lightest,?
smallest and most ergonomic hand piece?
available. Offering the shortest tip to hand?
distance and a higher working performance.
7. Process Control:
Regain control of your process! Set temperatures?
limits, read counters, block the station with PIN?
or block the keypad.
8. Intelligent Heat Management:
Extend tip life by reducing temperature and?
reduce energy usage to 10 watts during sleep?
and 4 watts when hibernating.
9. Easy Calibration:
Since JBC technology is microprocessor driven,?
it not necessary to recalibrate any of the JBC?
stations but, if required, calibration of the?
soldering tip can easily be done by using TI 2800?
Thermometer and the temperature adjustment?
featured in the station’s menu.
10. Improved Productivity:
The JBC technology gives an 80% improvement?
over the performance of the best soldering?
station available in the market. In the following?
graphs, based on practical test, we show this?
superiority.

在線詢盤/留言 請仔細填寫準確及時的聯系到你!

您的姓名：	您的姓名沒有寫*	預計需求數量：	* 請輸入整數 請?zhí)顚?xiě)數量
聯系手機：	*	移動電話或傳真：
電子郵件：	*郵箱格式不正確	所在單位：
咨詢內容：	我想了解：《JBC-DS360-A小型吸錫手柄》的詳細信息.請商家盡快與我聯系。 *

更多..本企業其它產品

阿波羅DCS-16PC烙鐵頭

阿波羅DCN-24PC烙鐵頭

阿波羅TAL0.5-650S60送錫管

阿波羅DCN-30PC烙鐵頭

阿波羅DCS-07PC烙鐵頭

阿波羅DCS-08D-2烙鐵頭

阿波羅DCS-13D-2烙鐵頭

阿波羅DCS-40D-2烙鐵頭

阿波羅DCS-10D-2烙鐵頭