- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
電梯軟擺錘,電梯門沖擊擺錘，擺錘
電梯沖擊軟擺錘：電梯擺錘沖擊試驗機配件
硬擺錘：包含一個由符合GB/T700的鋼材Q235A制成的沖擊環，電梯玻璃門硬擺錘，一個由符合GB/T700的鋼材Q275制成的殼體。內裝填直徑為3.5（±0.25）mm鉛球，其總質量為10kg左右。
1、 擺錘高度提升方式：程序控制擺臂擺動提升；
2 、沖擊高度：硬擺錘0-500mm，軟擺錘0-800mm；
擺錘垂吊狀態時與試樣距離：0-160mm（可調）；
3、 擺錘沖擊點高度調節范圍：500-1600mm（可調）；
4、 防二次沖擊：當擺錘沖擊樣品后彈起的同時擺臂上擺拉住擺錘，防止擺錘再次撞擊樣品；
5、 脫鉤裝置：電動控制，電梯轎壁擺錘沖擊，電磁鐵驅動；
6、 擺錘更換吊裝采用電動絞盤吊裝。
實際價格和參數請來電詳談，謝謝
Elevator soft swing hammer, elevator door impact pendulum, swing hammer
Elevator impact soft pendulum: Elevator pendulum impact test machine parts
Hard pendulum: contains an impact ring made of GB/T700 steel Q235A, the elevator glass door hard pendulum, a shell made of steel GB/T700 in accordance with Q275. Filled with a diameter of 3.5 (+ 0.25) mm shot, the total mass is about 10kg.
1, the pendulum height lifting way: program control swing arm swing;
2, impact height: hard pendulum 0-500mm, soft swing hammer 0-800mm;
When the pendulum hanging state and the sample distance: 0-160mm (adjustable);
3, the impact point of the pendulum impact point height adjustment range: 500-1600mm (adjustable);
4, to prevent secondary impact: when the pendulum hammer samples bounce and swing arm swing pull pendulum, prevent pendulum again impactor samples.
5, decoupling device: electric control, elevator car wall pendulum impact, electromagnet drive;
6, the pendulum by replacing hoisting electric winch hoisting.
The actual price and parameters, please contact us, thank you
