歐姆龍PLC CP1E-N30DR-A

歐姆龍PLC CP1E-N30DR-A
聯系人：魏工    電話：15882174684 
            座機：028-84472033  QQ：2030149354
產品資料：

Wiring

• Always confirm wiring diagrams before wiring sensors, limit

switches, or other devices.

• Lay the cables so that external force is not applied to the

Connectors. Otherwise, the degree of protection (IP67) may not be

achieved.

Degree of Protection

• The degree of protection of Connectors (IP67) is not for a fully

watertight structure. Do not the Connectors underwater.

• Do not step on or place any objects on the Connectors. Doing so

may damage the Connectors.

General Precautions

• Do not pull excessively on the Connectors or cables. Do not install

the Connectors or cables in any way that would place a load

directly on the mating section or cable connections. Doing so can

damage the Connectors or break the wires inside the cables.

• Install the Connectors and cables where they will not be stepped

on to prevent the wires inside the cables from being broken and to

prevent the Connectors from being damaged. If the Connectors or

cables must be installed where they might be stepped on, protect

them with covers.

• Refer to the specifications for your cables before bending the

cables and do not bend them past their minimum bending radius.

• If sensors or switches are not attached during installation, protect

the mating surface of the Connector with a XS5Z-11 Waterproof

Cover of XS2Z-14/15 Dust Cover.

Setup

• Do not make any cable bends near the base of the Unit.

• Any bends made must have a minimum radius of 40 mm.

Ordering Information

Materials and Finish

Plug

Socket

Rated current

Rated voltage

Contact resistance (connector)

Dielectric strength (connector)

Degree of protection

Insertion tolerance

Lock strength

Cable holding strength

Ambient operating

temperature range

Number of pressure-weld