- 產(chǎn)品
- 供應(yīng)
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
AAP135-S50/K4A00 AAI143-H60/K4A00 AAV144-H60/K4A00 AAV544-H60/K4A00 AAT141-H60/K4T00
AAP135-S60/K4A00 AAI143-HE0/K4A00 AAV144-HE0/K4A00 AAV544-HE0/K4A00 AAT141-HE0/K4T00
AAP135-SE0/K4A00 AAI143-HF0/K4A00 AAV144-HF0/K4A00 AAV544-HF0/K4A00 AAT141-HF0/K4T00
AAP135-SF0/K4A00 AAI143-S01/K4A00 AAV144-S01/K4A00 AAV544-S01/K4A00 AAT141-S01/K4T00
AAP135-H00/K4A00 AAI143-S51/K4A00 AAV144-S51/K4A00 AAV544-S51/K4A00 AAT141-S51/K4T00
AAP135-H50/K4A00 AAI143-S61/K4A00 AAV144-S61/K4A00 AAV544-S61/K4A00 AAT141-S61/K4T00
AAP135-H60/K4A00 AAI143-SE1/K4A00 AAV144-SE1/K4A00 AAV544-SE1/K4A00 AAT141-SE1/K4T00
AAP135-HE0/K4A00 AAI143-SF1/K4A00 AAV144-SF1/K4A00 AAV544-SF1/K4A00 AAT141-SF1/K4T00
AAP135-HF0/K4A00 AAI143-H01/K4A00 AAV144-H01/K4A00 AAV544-H01/K4A00 AAT141-H01/K4T00
AAP135-S01/K4A00 AAI143-H51/K4A00 AAV144-H51/K4A00 AAV544-H51/K4A00 AAT141-H51/K4T00
AAP135-S51/K4A00 AAI143-H61/K4A00 AAV144-H61/K4A00 AAV544-H61/K4A00 AAT141-H61/K4T00
AAP135-S61/K4A00 AAI143-HE1/K4A00 AAV144-HE1/K4A00 AAV544-HE1/K4A00 AAT141-HE1/K4T00
AAP135-SE1/K4A00 AAI143-HF1/K4A00 AAV144-HF1/K4A00 AAV544-HF1/K4A00 AAT141-HF1/K4T00
AAP135-SF1/K4A00 AAI143-S03/K4A00 AAV144-S03/K4A00 AAV544-S03/K4A00 AAT141-S03/K4T00
AAP135-H01/K4A00 AAI143-S53/K4A00 AAV144-S53/K4A00 AAV544-S53/K4A00 AAT141-S53/K4T00
AAP135-H51/K4A00 AAI143-S63/K4A00 AAV144-S63/K4A00 AAV544-S63/K4A00 AAT141-S63/K4T00
Pulse Input Module (Isolated Channels)
This module receives contact ON/OFF, voltage pulse and current pulse. This is isolated between the field and the system as well as between each channel.
It can be used in dual redundant configuration.
Items |
Specifications |
Model |
AAP135 |
Number of input channels |
8, isolated channels |
Input signal (*3) |
2-wire type: Contact ON/OFF, voltage pulse, current pulse (possible to supply transmitter power supply) 3-wire type: Power-supply-type voltage pulse |
Input frequency |
0 to 10 kHz (*4) |
Withstanding voltage |
Between input and system: 500 V AC, For 1 minute Between channels: 500 V AC, For 1 minute (*1) |
Minimum input pulse width |
40 µs |
Input signal level |
Contact input Open/close levels of relay contact and transistor contact Open: 100 kΩ or more, Close: 200 Ω or less Contact capacity When supplying 12 V DC: 15 V DC 15 mA or more When supplying 24 V DC: 30 V DC 30 mA or more Voltage/current pulse input (Current input is converted to voltage.) VH (high level): 3 to 24 V DC VL (low level): -1 to 8 V DC VH-VL (swing value): 3 V or more Signal source resistance: 1 kΩ or less |
Shunt resistance |
Can be selected from none/200/500/1000 Ω. (Open when power is OFF and for the standby side in a dual-redundant configuration) |
Pull-up resistance |
68 kΩ (12 V DC or 24 V DC) |
Filter |
Filter for eliminating chattering can be set. (*2) |
Data update period |
2 ms |
Transmitter power supply |
Can select 24 V DC/12 V DC. Limiter value 12 V DC ±10 %: 40 mA, 24 V DC ±10 %: 30 mA |
Maximum current consumption |
300 mA (5 V DC), 400 mA (24 V DC) |
Weight |
0.3 kg |
External connection |
Pressure clamp terminal, KS cable, MIL connector cable |
*1: The withstanding voltage for using MIL connector cable depends on the electrical specifications of its cable.
*2: When the pulse input signal is dry contact (such as from a mechanical relay) up to 10 Hz, it is possible to eliminate the chattering.
*3: The connection method of the field devices varies depending on the input signal.
For details, please refer to Installation Guidance (TI 33M01J10-40E).
*4: Input frequency is 0 to 800 Hz to receive no-voltage contact signals between terminal B and C.
