Boiler water level gauge M20*1.5*115mm

The company Alibaba TrustPass members: http://ksttcw.cn.1688.com/

Electrical measuring cylinder, liquid level meter level meter poleelectrode, manufacturer

Electric contact liquid level monitor is composed of a measuring cylinder,ultra pure ceramic electrodes, display instrument consisting of electric contact liquid level measurement, display and control instrument. Divided into common type, intelligent type, hanging type. It adopts dual colorLED display simulation on steam (red) and water (green), clearly indicate the level in the POSTTTION in the container, and has alarm, output function.

Electric contact liquid level monitor has the advantages of simple structure, intuitive display, reliable operation, small amount of repair,judgment and easy troubleshooting etc.. It uses the electrical signal transmission, not only a small delay variation, and no mechanical transmission generated and calibration error, without the need for error calculation and adjustment. Electrical contact level gauge has the advantages of the most prominent, is to adapt to variable parameteroperation of boiler, the boiler stop parameter varying operating conditions, instrument can accurately display the water level in the control room.

Liquid level measurement and control electric contact liquid level monitoris suitable for conductive liquid. Mainly used for monitoring of boiler drum water level, high and low pressure heater, a deaerator, evaporator,condenser, separator and other water tank liquid level measurement ofonce through boiler startup. But not suitable for combustible and explosive occasions.

Electric contact liquid level monitor main features:

The 1 electric contact measurement using AC power supply, effectivelyprolong the electrode life, avoiding the user frequent replacement ofelectrode troubles.

2 meter display part adopts analog display and digital display two waysat the same time, intuitively displayed lifting of water level.

3 has liquid level limit alarm function, the alarm can be set arbitrarilyaccording to user needs.

The 4 alarm control logic judging function, can effectively prevent thefalse water level alarm.

5 according to the power system disturbance characteristics, especiallythe anti-jamming measures.

6 with self power supply function, after the power is turned off can automatically switch to the machine battery self powered up to several hours, ensure that the power meter can normal indication, alarm level value (option).

7 has the function of self checking, the instrument panel for rapid detection of fault detection button two meter.

8 the instrument panel setting emission button, to eliminate the measuring cylinder discharge caused by lower false alarm and false action.

9 implementation of the water resistance automatic judgment, tracking,set the maximum water resistance and minimum steam resistance, the instrument can automatically judge, trace vapor resistance changes in the range of (intelligent).

10 the realization of human-computer dialogue, through panel keyoperation can be set for each scale value and any alarm set point value,and according to the scale values to facilitate the replacement of staff,general

The characteristics of strong, to overcome the old instruments are not interchangeable, standby specification requirements and other disadvantages (intelligent).

11 in order to effectively prevent the misoperation level protectionmechanism, the instrument can be added instrument startup delay work function.

12 can be equipped with 0 ~ 10mA or 4mA ~ 20mA current output function, easy to connect with other systems.

13, the lower limit of two groups with the relay normally open and normally closed contacts for outdoor use, the lower limit on the specialcan be equipped with three groups of normally open contacts.

14 wall mounted alarm contact down by 70 ° tilt installation, can effectively prevent the false water level alarm.

The 15 electrode with the test function, the instrument can be tested individually for each electrode, and can display the water resistance of every point (steam resistance) value (intelligent).

16 has strong fault tolerance, the intelligent level of recognition technology, to prompt the user for maintenance and replacement of the electrode (intelligent).

Technical index of electric contact liquid level monitor

· liquid resistance range

Common type: 0500k Ω (manual

Intelligent: 0500k Ω (tracking

· analog display: a set of color light emitting diode (up to 19 points,special specifications of up to 38 points) to steam with red green scaledisplay instant liquid level value.

Digital display: four digital tube digital display real-time liquid level value.

Ultra pure ceramic electrode to the two meter lead length (wall type: ≤ 200m ≤ 70m)

· isolation output: 010mA (RL ＜ 1K Ω), 4mA20mA (RL < 500 Ω)(optional)

· alarm output contact capacity: AC220V, 3A.

For the upper and lower limit for each of the two groups of normally open and normally closed contacts, special needs, can be used for a maximum of three groups, the lower limit of two or three groups ofnormally open contact.

· machine DC battery power supply time: 1 hours (optional)

· power: AC220V + 10%, 50Hz + 1Hz

· instrument working conditions: ambient temperature of-10 DEG C: 45 C

Relative humidity: ≤ 85%

· instrument the size of holes (mm): 152 + 1 * 76 + 1 or 152 + 1 * 152 + 1

· instrument size (mm):

Vertical: 80 x 160 x 300 (height * width * length)

Horizontal: 160 x 80 x 300 (height * width * length)

Square: 160 x 160 x 300 (height * width * length)

Wall type: 284 x 185 x 95 (height * width * thickness)

High temperature high-pressure electrode rod, electric contact water level gauge electrode | daily temperature measuring instrument | various models of specifications

φ 22 × φ 12L=97mm|DJY2212-9

φ 17 × φ 12L=97mm|DJY1712-9

φ 17 × φ 12L=87mm|DJY1712-8

M16*1.5*115mm|DJM1615-115

M16*1.5*97mm|DJM1615-97

M16*1.5*87mm|DJM1615-87

Press in type DJY2212-115 87 97mm, electrode, insulation type water level gauge

DJY1712-115 87 97mm total length, water level gauge electrode,insulation type

DJM1615-115 87 97mm total length, water level gauge electrode,insulation type

DJM1615-115 has been selected

DJY1712-87/

生產、銷售、批發、水位計電接、電極、型號djm2015-115
詳細介紹:

陶瓷電極，水位電極，電接電水位電極

，DJM1615-97,DJM1615-87,DJM1615-115

,DJM1815-87,DJM1815-97,DJM1815-115,

DJY2212-115,DJY2212-97,DJY2212-87

DJM2015-87,DJM2015-97,DJM2015-115

DJY1815-97,DJY1815-87,DJY1815-115

可定制任何規格電極，　　

一、產品簡介
    DJM系列水位計電接點是導電液體控制的元件，采用99.9%的高純氧化鋁陶瓷管及合金鋼以特殊的金陶焊接工藝封接而成,牢固可靠,反應靈敏,控制準確.
DJM系列水位計電接點與本公司生產的UDZ型雙色數顯智能電接點液位計配套, 可廣泛應用于發電、染織、化工等工礦企業的大中型鍋爐，監視鍋爐汽包水位、高壓加熱器、除氧器、蒸發器、凝結器、直流鍋爐啟動分離器和雙水冷發電機水箱等水位測量和其它導電液體的液位測量。

二、規格參數
耐溫：≤540℃
耐壓：≤42Mpa
絕緣電阻值：≥100MΩ
在PH=10的條件下能經受一萬小時的腐蝕
制造材料：絕緣部分為99.9%高純氧化鋁
        導體部分為合金鋼材料(可定制1Cr18Ni9Ti)


產品介紹 :