AK-30涂層測厚儀AK30 Coating thickness gauge

 本儀器采用了磁性和渦流兩種測厚方法，可無損地測量磁性金屬基體(如鋼、鐵、合金和硬磁性鋼等)上非磁性覆蓋層的厚度(如鋅、鋁、鉻、銅、橡膠、油漆等)及非磁性金屬基體(如銅、鋁、鋅、錫等)上非導電覆蓋層的厚度(如:橡膠、油漆、塑料、陽極氧化膜等)。
? 自動識別金屬底材
? 自動選擇測量方法－－磁性法或電渦流法
? 兩種測量方式：連續測量方式（CONTINUE）和單次測量方式（SINGLE）
? 兩種工作方式：磁性與非磁性
? 五個統計量：平均值（MEAN）、最大值（MAX）、最小值（MIN）、測試次數（NO．）、標準偏差（S．DEV）
? 可采用兩種方法對儀器進行校準
? 存貯功能：可存貯100 個測量值
? 刪除功能：對測量的單個或所有數據進行刪除
? 可設置限界：對限界外的測量值能自動報警
? 電源欠壓指示
? 操作過程有蜂鳴聲提示（單次測量方式）
? 錯誤提示功能，通過屏顯或蜂鳴聲進行錯誤提示
? 設有兩種關機方式：手動關機方式和自動關機方式

AK30涂層測厚儀產品技術參數：

可廣泛用于制造業、金屬加工業、化工業、商檢等檢測領域。由于該儀器體積小、測頭與儀器一體化，特別適用于工程現場測量。

AK-30 coating thickness tester AK30 Coating thicknessgauge

AK30 coating thickness tester product introduction:

This instrument is a super small measuring instrument, it can fast, no damage, precise measurement of magnetic metallic coatings on non-magnetic cover layer thickness.The instrument to meet the following criteria: GB/T 4956 - 1985 non-magnetic coatings on magnetic substrates - Measurement of coating thickness of magnetic method for JB/T 8393 - 1996 magnetic and eddy current type coating thickness meter JJG 889 - 95 "reluctance thickness detector"

This instrument uses a magnetic and eddy current twokinds of thickness measurement, nondestructive measurement can be magnetic metal (such as steel, iron,alloy steel and hard magnetic and non-magnetic)thickness of coating layer (such as zinc, aluminum,chromium, copper, rubber, paint and so on) and non magnetic metal (such as copper, aluminum, zinc, tin and other) of non-conductive cover layer thickness (such as:rubber, paint, plastic, anodizing etc.).

Automatic recognition of metal substrate?

? automatic selection of measurement method magneticmethod or eddy current method

? two measurement mode: continuous measurement mode (CONTINUE) and single measurement (SINGLE)

? two working modes: magnetic and non magnetic

? five statistics: Average (MEAN) (MAX), maximum value,minimum value (MIN), the number of tests (NO.), standard deviation (S.DEV)

? can adopt two kinds of methods of calibration

? storage function: it can store 100 sets of measurements

Delete function:? On the measurement of single or all data to be deleted

? can set the gauge: to gauge measurements canautomatic alarm

Undervoltage indication of power?

? operation beep prompt (single measurement)

? error function, error indicating that the screen display or hum

? with two kinds of mode: manual shutdown shutdown and automatic shutdown mode

Technical parameters of AK30 coating thickness gaugemeasurement:

The product model

Measuring range

The lower limit of resolution

Error of indication

Statistical function

Measuring function

AK-30

0~1250um

0.1 μ

Zero calibration (UM)

Two point calibration (UM)

± [3%H+1], H refers to the actual thickness of the object to be measured, hereinafter the same

The average value (MEAN), maximum value, minimum value (MAX) (MIN),

The number of tests (NO.), standard deviation (S.DEV)

Magnetic

Can be widely used in manufacturing industry, metalprocessing industry, chemical industry, commodity inspection and testing field. Due to the small size of the apparatus, probe and instrument integration, especially suitable for field engineering measurement.