臺灣納瑪NAMA氣動清廢機、打卡紙機 MA-250

臺灣納瑪NAMA氣動清廢機、打卡紙機 MA-250
本機適用于印刷行業紙板、細瓦楞和普通瓦楞紙的廢邊清除
1、結構緊湊，采用輕巧手提式設計，使用非常方便，男女員工經簡單培訓均可操作
2、輕松快捷清廢，效率高，比傳統人力清廢效率提高5-10倍，極大地縮短了交貨周期
3、與錘敲清廢方式相比，清廢時不損傷粘結部位，廢品率大幅降低，提高后道工序效率
動力源采用氣動馬達，安全性好
4、齒鏈采用高強度合金鋼經過熱處理工藝，硬度更高，耐磨性強，使用壽命長
5、適用紙張范圍：200g/㎡-500g/㎡卡紙,單/雙坑紙，互裱卡紙板

Specifications
carton waste cleaner is suitable for printing cartons,small(E-type)and common corrugated boards wastes cleaning.
carton waste cleaner
1.Suitable for printing cartons,small(E-type)and common corrugated boards’ wastes cleaning
2.The structure is compact,adopting light hand-held designer,comfortable use;only a little training can easily operate for male and female workers
3.Easily job,high effectiveness;compare with wastes-cleaning way by manhands,the efficiency can be up to 5-10 times
4.Compare with hammer’s striking,no injured the products,more less wastes;promping the post-process effectiveness
5.Adopting air motor,safety is better
6.The gear-chains use high strength alloy-steel,nice heat-treatment process,high hardness,anti-wear,longer-life
7.Board ranges:200-500gsm cartons,single/double corrugated boards and laminated cartons

特點：利用尖利齒將廢紙邊勾出清除、清廢率提升10倍、人工清廢需要3個小時、機械作業10-30分鐘即可完成。

氣動清廢機（小齒）：用于卡紙產品的清廢。
氣動清廢機（中齒）：用于卡紙，細坑紙瓦楞紙產品的清廢。
氣動清廢機（大齒）：用于細坑，粗坑紙產品灰紙板的清廢。
本清廢機的齒鏈采用高強度合金鋼經過熱處理工藝處理，硬度極高，耐磨性強，使用壽命長，且替換方便

We have three models :
MA-250B
Large teeth for corrugated paper
MA-250
In teeth for cardboard corrugated paper
MA-450
Small teeth for cardboard
Range for the paper is 150g/²-1000g/² cardboard.
Range for double corrugated paper , double laminated corrugated paper .
High-speed running gear is cycle driven through air motor , stirp waste margin paper with sharp teeth gear.
The gear use high strength diamond compound after heat treatment , high hardness , wear resistance , long life and easy replacement .
Stripping efficiency is improved by 10 times .
Manual stripping needs hours , finished only in 10-30 minutes with stripping machine .
Easy to use , worker can operate the machine after simple training.
No damage for bonding area while stripping