1. Daily check

2), Connector, connecting wires and cap:
Must check if there is any corrosion between connector pole’s joining and leading wires,also check if the cap had the transmutative situation or over-heat problem.
3), Appearance:
Battery’s exteriordirty would cause creepag, must keep battery’s surface to be clear and dry.
2,Maintenance:
1), Fill water:
fill distilled water or deionized water according to electrolyte level, don’t fill too much distilled water in order to delay filling time, too much distilled water would cause lower specific gravity, electrolyte would spill over,and this situation would corrode metal box and cables, and effect battery’s service life and creepag.

3,Storage:
1), Storage location:do not make battery short circuit;there would cause short circuit after the rain, must keep the battery in the open air and shady location.
2), Used battery:
Used battery still have capacity, please keep the battery as per storage method.
4,Electrolyte’s operation
1), Check density:
Use inhale densitometer check density, do not spill electrolyte out from the battery, and make sure wear the protective cloth.
2), Other operation:
Should refer to professional engineer, especially when fill the electrolyte
3),Electrolyte’s leakage:

Urgent handle is needed when battery’s turn over or destroy happens.

Special note

1), Please kindly use the forklift battery according to Seawill operation manual, do not over charge or over discharge the battery, or not charge the forklift battery enough, please charge the battery in constant current every month, otherwise it would reduce the battery's capacity and shorter battery's cycle life.

2), Please check battery's level every week, the professional engineer or worker is needed in the checking. Please make sure the battery's electrolyte is not lower than the Minimum level, otherwise it would cause the battery's over heat and burn out.