PC+ABS C1100基礎創新塑料(高流動)

PC/ABS沙伯基礎C1100應用范圍：PC/ABS，聚碳酸酯和丙烯腈-丁二烯-苯乙烯共聚物和混合物，是由聚碳酸酯（Polycarbonate）和聚丙烯腈（ABS）合金而成的熱可塑性塑膠，結合了兩種材料的優異特性，ABS材料的成型性和PC的機械性、沖擊強度和耐溫、抗紫外線（UV）等性質，可廣泛使用在汽車內部零件、事務機器、通信器材、家電用品及照明設備上。1、汽車內外飾：儀表板，飾柱，儀表前蓋，格柵，內外飾件  2、商務設備機殼和內置部件：筆記本/臺式電腦，復印機，打印機，繪圖儀，顯示器 3、電信，移動電話外殼，附件以及智能卡（SIM卡） 4、電器產品，電子產品外殼，電表罩和殼體，家用開關，插頭和插座，電纜電線管道  5、家用電器，如洗衣機，吹風機，微波爐內外部件等

華韻塑料貿易（東莞）有限公司為華東地區德國科思創(拜耳)工程塑料一級代理商，長期經銷代理PC/ABS 沙伯基礎C1100。公司秉承“以誠為本，信譽至上”的經營宗旨，【誠信第一】【品質第一】創立了自己的經營理念，在客戶群樹立了良好的口碑。為您提供充足的貨源和專業的技術支持！公司所售之新料均保證原廠原包，貨真價實!歡迎廣大新老客戶來電咨詢采購！聯系人：劉女士，銷售

PC/ABS 沙伯基礎C1100成型特性：

1.無定形料,流動性中等,吸濕大,必須充分干燥,表面要求光澤的塑件須長時間預熱干燥80-90度,3小時.

2.宜取高料溫,高模溫,但料溫過高易分解(分解溫度為>270度).對精度較高的塑件,模溫宜取50-60度,對高光澤.耐熱塑件,模溫宜取60-80度.

3、如需解決夾水紋，需提高材料的流動性，采取高料溫、高模溫，或者改變入水位等方法。

4、如成形耐熱級或阻燃級材料，生產3-7天后模具表面會殘存塑料分解物，導致模具表面發亮，需對模具及時進行清理，同時模具表面需增加排氣位置。

東莞市華韻塑料供應PC/ABS（包括但不限于以下型號）

東莞市華韻塑料供應PC/ABS MC1300沙伯基礎電鍍合金

東莞市華韻塑料供應PC/ABS MC8002沙伯基礎高抗沖

東莞市華韻塑料供應PC/ABS C1110沙伯基礎高流動高沖擊

東莞市華韻塑料供應PC/ABS C1110HF沙伯基礎高流動高沖擊(本色)

東莞市華韻塑料供應PC/ABS C1200沙伯基礎高粘度低流動高抗沖耐高溫性好HB

東莞市華韻塑料供應PC/ABS C1200HF沙伯基礎耐熱級高流動

東莞市華韻塑料供應PC/ABS C6200沙伯基礎阻燃UV穩定

東莞市華韻塑料供應PC/ABS C6600沙伯基礎防火V0級

東莞市華韻塑料供應PC/ABS C2800沙伯基礎阻燃V0流動性佳

東莞市華韻塑料供應PC/ABS C2950沙伯基礎阻燃V0耐高溫

東莞市華韻塑料供應PC/ABS C2950HF沙伯基礎阻燃級高流動

東莞市華韻塑料供應PC/ABS C1110-100沙伯基礎高流動高沖擊(本色)

東莞市華韻塑料供應PC/ABS C1110HF-100沙伯基礎高流動流動改良

東莞市華韻塑料供應PC/ABS C1200-701沙伯基礎耐高溫

東莞市華韻塑料供應PC/ABS C1200HF-701沙伯基礎高流動級耐高溫

東莞市華韻塑料供應PC/ABS C1200HF-100沙伯基礎耐高溫流動性改良(本色)

PC/ABS alloy with PC and ABS as main raw materials is an important engineering plastic alloy, which has good formability, low temperature impact resistance, high temperature deformation temperature and light stability. Compared with PC, PC/ABS alloy reduced the melt viscosity, improved the processability and greatly improved the stress cracking resistance of the product, compared with ABS, PC/ABS alloy improved the heat resistance and weather resistance. Cost lower than PC, both PC and ABS performance, therefore has a broad application prospects and huge market value, its main application areas include automobiles. Electrons. Electrical appliances, etc. . How to improve the compatibility of PC/ABS alloy and improve the comprehensive mechanical properties of PC/ABS alloy is a practical problem which needs to be solved urgently. PC/ABS is a kind of modified engineering plastics synthesized by mixing. Among them, PC is polycarbonate, ABS is acrylonitrile (a) , Butadiene (b) and styrene (s) copolymer. PC/ABS has the characteristics of both PC and ABS. The ratio of the two will affect the thermal stability of PC/ABS. The PC/ABS blend also exhibits excellent flow properties. The shrinkage is around 0.5% . The properties of the modified plastics are better than those of Pc and ABS, for example, the impact resistance, heat resistance and hardness are improved.