噴霧干燥型聚合氯化鋁的產品質量很多時候關系到人們的生命健康，因此，生產噴霧干燥型聚合氯化鋁具有明確而嚴格的標準，可以保證人們的健康和安全。
滾筒式聚氯化鋁 鋁含量一般,水不溶物高,多用于污水處理.
板框式聚氯化鋁 鋁含量高， 水不溶物低. 用于污水處理和飲用處理.
噴霧干燥聚氯化鋁 鋁含量高， 水不溶物低，溶解速度快，用于飲用水及更高標準水處理.
PAC聚氯化鋁由于噴霧干燥穩定性好，適應水域寬，水解速度快，吸附能力強，形成礬花大，質密沉淀快，出水濁度低，脫水性能好等優點，在同樣水質的情況下，噴霧干燥聚氯化鋁投加量減少，尤其在水質不好的情況下，噴霧干燥產品投量與滾筒干燥聚氯化鋁相比，可減少一半，不僅減輕了工人的勞動強度，而更重要的是減少用戶的制水成本。除此之外，用噴霧干燥產品可保證安全性，減少水事故，對居民飲用水非常安全可靠。When treating drinking water, polyaluminium chloride with low content will have more impurities and water insolubles, so high content is required. Especially in papermaking, cosmetics production is to use high content.
Drinking water must be treated at drinking water level. Heavy metals are not detected at industrial level, and insoluble substances in water are also higher than drinking water. Generally speaking, drinking water level is related to human life and can not be used arbitrarily. It must be a real drinking water level. If industrial level is used for drinking water, there are many hidden dangers. And the purity is different, industrial use is 26-28%, drinking water is 30%.
And sewage treatment, the content requirements are not strict, low content is not too much, you can put more medicines can also achieve the desired effect.
Henan an Jia Jing Environmental Protection Technology Co., Ltd. specializes in the production of polyaluminium chloride, which is mainly divided into drinking water level and industrial grade. The production process is mainly divided into spray method and roller method.
Drum-type polyaluminium chloride is generally used for sewage treatment because of its high water insoluble content.
Plate-frame polyaluminium chloride has high content and low water insoluble. It is used for sewage treatment and drinking treatment.
Spray drying has high content of polyaluminum chloride, low insoluble substance and fast dissolution rate. It is used for drinking water and higher standard water treatment.
PAC polyaluminium chloride has the advantages of good stability in spray drying, wide adaptation to water area, fast hydrolysis speed and strong adsorption capacity. It has the advantages of large alum, high quality and fast sedimentation, low turbidity and good dewatering performance. Under the same water quality, the dosage of spray drying polyaluminum chloride is reduced, especially when the water quality is not good, the product volume of spray drying is compared with that of drum drying polyaluminum chloride. It can be reduced by half, which not only reduces the labor intensity of workers, but also, more importantly, reduces the cost of water production for users. In addition, spray drying products can ensure safety and reduce water accidents, which is very safe and reliable for drinking water.
的pH范圍寬得多。我們必須注意試驗中根據水質使用聚氯化鋁，選擇清水的效果很小。的一點。
