清河聚氨酯發泡機專用熱媒加熱裝置 導熱油加熱油爐
結構性能介紹 MPW-30A
173-726O-59O6
機械管路系統：
1、 內部管路全部為無縫不銹鋼一體成型，加熱均勻，管損小；
2、 設有泄壓回路裝置、缺水警報，保護泵浦及發熱管。
3、 升溫及降溫速度快、穩定快，空機升溫至150℃約5分鐘。
4、 循環系統水泵采用“邁浦特”高壓力大流量180℃熱水泵，導熱效果好，
模具升溫快，溫差小，節能20%以上。
5、 使用法蘭型瑞典絲雙功率不銹鋼電熱管，適合不同溫控場合使用，
進口電熱絲，使用壽命長，不易燒壞；
6、 壓力指示表；
mechanical piping system:
1. All the inner pipelines are made of seamless stainless steel, with uniform heating and little pipe loss;
2 、 equipped with pressure release loop, water shortage alarm, protection pump and heating pipe.
3, heating and cooling speed fast, stable and fast, empty machine heating up to 150 degrees, about 5 minutes.
4, the "Maipute" circulation system of water pump with high pressure and large flow of 180 DEG C hot water pump, thermal effect is good,
Mold temperature rise, small temperature difference, energy-saving more than 20%.
5, the use of flange type Swedish silk double power stainless steel electric heating tube, suitable for different temperature control occasions, Imported hot wire, long service life, not easy to burn;
6, pressure indicator;
我公司本著誠信為基礎的原則，實行售后24小時內到達機器售出點，以誠意打動客戶，盡全力保證客戶當天生產，詳詢我公司網站：www.maiput.com www.dianjiareyoulu.com 或電：173-726O-59O6
