Autoclave Engineers AHL33-2D 型高流量氣動高壓液體增壓泵
雙作用雙活塞空氣驅動

Autoclave Engineers Series AHL33-2D Air-Operated, High-Flow/High-Pressure Hydraulic Pump

Autoclave Engineers AHL33-2D series pump is designed for customers that have a need for high pressure but want high flow(fill) rates all in one pump.  This pump can generate a fill rate of almost 8 GPM while maxing out at over 6,700 psi (462 bar) utilizing a low pressure air input of 20-110 psi (1.4 – 7.6 bar). Being air driven, the pump is explosion proof and safe for use in hazardous areas.  Pumps are used for pumping oil, water or oil/water mixtures.  However, all AE pumps are designed standard with stainless steel wetted parts, and along with special seals makes them ideal for many chemical applications.

雙作用雙活塞空氣驅動 技術參數(液體方面性能參數)

 介質:油，水或水/油混合物以及其他兼容的流體介質
 最大出口壓力:6700Psi(462bar)
 增壓比:1:67
 隔離室（防止空氣部分被污染）：標準
 排量/循環: 15.3 in3(250.7 cm3)
 雙入口連接: 1" FNPT
 雙出口連接: 1/2" FNPT

AHL33-2D Series Pump:Air-Operated, High-Flow / High-Pressure Hydraulic Pump
Features:
High Flow, Air Operated Liquid High Pressure Pump
Double-Acting, 10” Dual Piston Air Drive Delivers Smooth Output
Air to Pressure Ratio:  1:67
Air Drive Pressure Range:  20-110 psi (1.4-7.6 bar)
Volume Displacement per Stroke:  7.8 in3 (127.8 cm3)
Stainless Steel isolation (distance) chamber to protect air-drive section from main seal failure is standard
Maximum Outlet Pressure:  6,700 psi (462 bar)
Nominal air pressure required for maximum output pressure is 100 psi (6.9 bar)
Stainless Steel wetted parts suitable for oil or water applications

技術參數(氣體方面性能參數)

 驅動空氣壓力范圍: 20-110 psi (1.4-7.6 bar)
 活塞:440不銹鋼
 額定工作壓力:6700PSI(462bar)
驅動空氣壓力:100psi(6.9bar)
 入口: 1" female FNPT
 測試口: 1/8" female FNPT
 排氣口(移去消聲器): 1" female BSP
出廠時涂有密封潤滑油
耗氣量:50psi 氣源壓力, 零流體壓力時,290SCFM