手動液壓搬運車鋼板厚度介紹：
        一般好一點的3.0t的車采用的是4mm鋼板，而差一些的鋼板厚度加上油漆厚度都達不到4mm，有的甚至只能達到3mm，這樣偷工減料換來的價格優勢，對消費者是很不付責任的。這樣的車容易在后續的使用中出現故障。另外，標準型的5.0t的手動液壓車鋼板厚度也要達到8mm以上，否則很難承受如此自重。

Steel plate thickness
General good of 3.0T car uses is 4mm steel plate,and some of the thickness of the steel plate and paint thickness of less than 4 mm, some even can reach 3mm, so Jerry in exchange for the  price advantage, to consumers is is the responsibility of non payment.

Such cars are prone to failure in the subsequent use of. In addition,the standard type of 5.0t manual hydraulic car steel plate thickness of  8mm or more, otherwise it is difficult to bear the weight.

      由于我們的產品在不斷的升級改造，為了達到您最滿意的效果，請在購買前通知我們的客服人員或者撥打聯系方式：13933002678  0311-89619123