| 訂貨號 |
SENPULL
|
加工定制 |
是
|
貨號 |
SENPULL
|
| 類型 |
風冷式冷凍機
|
品牌 |
senpull
|
型號 |
SENPULL
|
| 額定制冷量 |
0.59-18.4（KW）
|
輸入功率 |
2.3-60（kw）
|
外形尺寸 |
各種尺寸（m）
|
| 重量 |
63-4300（kg）
|
應用領域 |
空壓機后置凈化設備
|
冷凍方式 |
水冷式
|
| 規格 |
風冷式，水冷式
|
是否跨境出口專供貨源 |
否
|
|
常溫風冷型壓縮空氣冷凍式干燥機，高溫風冷型壓縮空氣冷凍式干燥機，常溫水冷型壓縮空氣冷凍式干燥機，高溫水冷型壓縮空氣冷凍式干燥機
一、壓縮空氣冷凍式干燥機的工作原理
壓縮空氣冷凍式干燥機是根據冷凍除濕原理，利用全封閉壓縮式制冷系統，對經空壓機排出的壓縮氣體冷卻降溫，使其中所含的大量飽和水蒸氣、油霧凝結液滴，經過經汽水分離后由自動排水器排出，在較高溫度的飽和壓縮氣體進入壓縮空氣冷凍式干燥機的預冷器，在預冷器中與來自蒸發器的干冷氣體進行熱交換，降低溫度后進入制冷系統的蒸發器，與冷媒汽進行第二次熱交換，使本身溫度降到接近于冷媒的蒸發溫度，在兩次降溫過程中，壓縮氣體中的水蒸汽得以凝結成液態水滴并隨氣流進入氣水分離器，分離下來的液態水經自動排水器排出機外，溫度較低的干燥壓縮氣體進入預冷器，與剛進入的濕飽和氣體進行熱交換，使本身溫度得到提高，從而在壓縮空氣冷凍式干燥機排氣口得到含水量較低（即露點較低）、相對濕度也很低的干燥壓縮氣體。冷凍式干燥機由于工作可靠、管理方便、運行費用低廉而成為各行業空壓站房凈化設備的首選機型。
二、產品特點
1）人性化設計：科學合理結構設計，外型新穎，美觀大方，操作、維護、保養方便，安裝簡便（無基礎）。
2）機器制冷系統及空氣系統經專家結合全國各地不同工況的差異性進行綜合準確計算，設計參數留20%以上的裕量。
3）制冷壓縮機：采用國際高性能制冷壓縮機，低震動、低噪音、性能可靠、節能高效，確保整機的使用壽命長。壓縮機防護等級為IP54級。
4）特殊熱交換設計，可降低入口溫度，并提高出口空氣溫度，可避免管路產生水滴，影響生產環境。
5）多種形式（單、集、聯控、PLC、變頻等）的控制線路。適合不同用戶的選用。
6）完善的智能保護裝置：特設冷媒高低壓保護、相序缺相保護、過低溫保護以及自動融霜、故障自動停機、自動報警、電機過熱保護等保護功能。
7）自動排水器按需設置，除水效率高。浮球式、電子定時可根據機器工況選擇設置。
8）本機組采用獨特的旋風式分離器。可將冷凝水從空氣中徹底分離出來，并在各種氣流條件下防止液態水份隨壓縮空氣帶出，保持高效的運行，達到干燥除水目的。
9）承壓部件均按國家GB150-1998《鋼制壓力容器》和GB151-1999《管殼式換熱器》進行制造、試驗和驗收，并接受《壓力容器安全技術監督規程》的監督。設備結構設計合理，便于維護保養；表面熱噴塑，外形美觀，不生銹；無基礎安裝，運行平穩無振動，維修率低，無消耗品，運行費用少，連續運行無須專人守候。
三、工況條件與技術指標
進氣溫度：常溫型≤45℃，高溫型≤80℃冷卻方式：風冷（水冷），壓力露點：1.7℃～10℃（0.7MPa），制冷劑：R-22或根據客戶要求可采用R134a，R404a，R507等無氟環保制冷劑。進氣壓力：0.2～1.0MPa（6.4MPa以下接受訂貨），壓力損失：≤0.02MPa冷卻水進水溫度：≤32℃（水冷），冷卻水進水壓力：0.15～0.4MPa(水冷)
四、型號規格與性能參數□常溫風冷型壓縮空氣冷凍式干燥機
□高溫風冷型壓縮空氣冷凍式干燥機□常溫水冷型壓縮空氣冷凍式干燥機□高溫水冷型壓縮空氣冷凍式干燥機
注：1）中、高壓型、防爆型、不銹鋼型、無氟型、變頻控制型、電腦集中控制等特殊要求均可定制。2）低壓型、特殊氣體（如沼氣、氫氣、氮?dú)狻⒍趸嫉龋?/span>300m3min以上接受訂貨。3）技術參數若有改動，以實際產品為準，怒不另行通知。
Ambient air-cooled refrigerant compressed air dryers, high temperature air-cooled compressed air refrigeration dryer, ambient water cooled refrigerant compressed air dryers, hot water cooled compressed air refrigeration dryer Ambient air-cooled refrigerant compressed air dryers, high temperature air-cooled compressed air refrigeration dryer, ambient water cooled refrigerant compressed air dryers, hot water cooled compressed air refrigeration dryer First, the compressed air refrigeration dryer works 2, product features 1) user-friendly design, scientific and reasonable structure design, the mobile phone looks stylish, and aesthetically pleasing, operating, maintenance, and easy to service, and easy to install (no). 2) Machine cooling system and air system by experts throughout with different performance of variability in accurate calculations, design parameters for more than 20 per cent of the overhang. 3) refrigerant compressor: the international high performance refrigerant compressor, low vibration, Low Noise, reliable and energy-efficient, and ensure that the whole is a long service life. Compressor protection to IP 54 level. 4) Special Heat Exchanger Design to reduce inlet temperatures, and to increase outlet air temperature, to avoid lines generated droplets, impact to the production environment. 5) multi-format (Single, set, the control, PLC, frequency, etc. ) of the control line. Suitable for different users. 6) Complete the SMART protection: The ad hoc refrigerant high and low pressure protection, phase sequence is the protection, the low-temperature protection, as well as automatic integration into cream, the automatic shut-down, auto alarm, motor thermal protection, and protection features. 7) Automatic drainage, the need to set up with high water removal efficiency. Float, electronic timer can be based on the machine performance settings. 8) this unit with the unique Tornado separator. The condensate from the air completely detached, and in a variety of flow conditions prevent liquid water with compressed air, maintaining a high-performance, achieve the best dry from the water. 9) the pressure parts are the national GB 150 - 1998 the steel pressure vessel and GB 151 - 1999 the tube and shell heat exchangers of manufacturing, testing and acceptance, and acceptance of the pressure vessel safety technical supervision of the Statute. Device Structure design is very reasonable, and easy to repair and maintenance; the surface thermal injection molding, nice appearance, does not rust; a basic installation, run smoothly without vibration, the repair rate is low and no consumables, running costs low, continuous running without someone inside. 3, conditions and specifications Intake Air Temperature: Ambient-type =45 °C, high temperature =80 °C cooling: Air-cooled (water-cooled) and the pressure dew point: 1.7 °C ~10 °C (0.7 MPa) refrigerant: R - 22 or according to customer requirements in R 134 a, R 404 a, 507 R, no fluorine environmentally friendly refrigerant. Inlet pressure: 0.2 ~1.0 MPa (6.4 MPa following Order), the pressure loss: ≤ 0.02 MPa cooling water inlet temperature: = 32 ?C (water-cooled), the cooling water inlet pressure: 0.15 ~0.4 MPa (water-cooled) 4, model specifications and performance parameters and ambient air-cooled compressed air refrigeration dryer The high temperature air-cooled compressed air refrigeration dryer and ambient water-cooled, compressed air refrigeration dryer and hot water-cooled, compressed air refrigeration dryer Note: 1), high-pressure, anti-explosion-type, stainless steel, no fluorine, variable frequency control, computer control, etc. Special requirements can be customized. 2) low-voltage, special gases (such as methane, hydrogen, nitrogen, carbon dioxide, etc. ), 300 M 3 min or more to order. 3) technical parameters if there are changes to the product, without notice.
