|
|
||||||||||||||||||||||||||||
EK1300 耦合器將 EtherCAT 端子模塊(ELxxxx)集成在 EtherCAT P 網絡中。上面的 EtherCAT P 接口用于連接耦合器到網絡中,下面的 EtherCAT P 編碼的 M8 接口可用于延伸 EtherCAT P 拓撲結構。由于 EtherCAT P 將電源和通訊集成在一根電纜中,因此,不再需要通過端子模塊接點額外給耦合器供電。視具體的應用,系統和傳感器電源 US 或執行器的外設電壓 UP 可以與電源觸點橋接。除了運行 LED 和鏈路及活動狀態之外,狀態 LED 還可以指示 US 和 UP 電壓狀態以及過載和短路事件。對本合同工程,我們做如下質量承諾:
1)在系統驗收后一年以內(質保期為一年)提供免費維修和維護保養,保證在質保期后有10年的配件供應保障能力、技術支持及服務、并提供系統升級技術支持。
2)保證按照合同規定所提供的設備是全新的、完整的,技術水平是先進的、成熟的,設備的部件符合安全可靠、有效運行和易于維護的要求。
3)在合同有效期內,保證所提供的合同設備的數量、質量、工藝、設計、規范、型式及技術性能完全符合技術條款和運行要求以及工程要求。
4)在質量保證期內,承擔合同設備功能、技術性能、制造質量、安裝調試等質量缺陷的責任。
5)在質量保證期內,對合同設備關鍵部件潛在缺陷以及技術性能的缺陷提供質量保證。
6)所有設備的質量保證達到招標文件的要求,設備到貨后提供設備原廠出廠證明材料。
7)確系質量原因無法正常工作時,我方承諾無償更換全新合格的產品。
售后服務
服務承諾
1)提供與項目相關的完整、齊全的技術資料和軟件;
2)改造項目出現故障,在接到采購人通知后8小時內做出回應,必要時派專業人員在24小時內到達現場,并及時采取有效措施恢復設備正常運行;
3)質量保證期為壹年,自驗收合格之日起計算。在質量保證期內,如因改造質量原因造成設備故障,免費進行更換
The EK1300 coupler integrates EtherCAT Terminals (ELxxxx) in the EtherCAT P network. The upper EtherCAT P interface is used to connect the coupler to the network, the lower EtherCAT-P-coded M8 socket is used for optional continuation of the EtherCAT P topology. Since EtherCAT P integrates the power supply and the communication on a single line, an additional power supply for the coupler via the terminal points is no longer required. Depending on the application, the system and sensor supply US or the peripheral voltage for actuators UP can be bridged to the power contacts. In addition to the Run LED and the link and activity status, status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.BECKHOFF倍福ek1300耦合器ek1300 特價全新模塊

| Technical data | EK1300 |
|---|---|
| Task within EtherCAT system | coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT P networks |
| Data transfer medium | EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks |
| Bus interface | 2 x M8 socket, shielded, screw type, EtherCAT-P-coded |
| Power supply | from EtherCAT P (24 V DC for US and UP) |
| Total current | from EtherCAT P, max. 3 A per US and UP |
| Current consumption from US | 40 mA + (∑ E-bus current/4) |
| Current consumption from UP | typ. 4 mA |
| Current supply E-bus | 2000 mA |
| Current rating per port | max. 3 A per US and UP |
| Electrical isolation | 500 V (power contact/supply voltage/Ethernet) |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Approvals | CE |

| 技術參數 | EK1300 |
|---|---|
| EtherCAT 系統內的任務 | 連接 EtherCAT 端子模塊(Elxxxx)與 100BASE-TX EtherCAT P 網絡 |
| 數據傳輸介質 | EtherCAT P 電纜,屏蔽型,與 100BASE-TX EtherCAT P 網絡連接 |
| 總線接口 | 2 x M8 母頭,屏蔽型,螺旋式,EtherCAT P 編碼 |
| 電源 | 由 EtherCAT P(用于 US 和 UP的 24 V DC)供電 |
| Total_current | 由 EtherCAT P 供電,每個 US 和 UP 最大 3 A |
| Us 電流消耗 | 70 mA +(Σ E-bus 電流/4) |
| Up 電流消耗 | – |
| Current_rating_per_port | 每個 US 和 UP 最大 3 A |
| E-bus 電流消耗 | – |
| 工作/儲藏溫度 | 0…+55 °C/-25…+85 °C |
| 抗振/抗沖擊性能 | 符合 EN 60068-2-6/EN 60068-2-27 標準 |
| 抗電磁干擾/抗電磁輻射性能 | 符合 EN 61000-6-2/EN 61000-6-4 標準 |
| 防護等級/安裝位置 | IP 20/可變 |
