- 產品
- 供應
- 公司
- 新聞
|
|
||||||||||||||||||||||||||||
In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.
若與 EtherCAT 耦合器 EK1100 配套使用，單端口 EtherCAT 光纖分支耦合器 EK1521 可以將 100BASE-TX 物理層轉換成 100BASE-FX 物理層（玻璃光纖）。如果最大距離達到 2 千米，可通過用于多模光纖的 EK1521 和 EK1501 系列 EtherCAT 耦合器進行橋接。用于單模光纖的 EK1521-0010 和 EK1501-0010 允許的最大距離為 20 千米。采用單端口 EtherCAT 光纖分支耦合器甚至還可以實現帶光纖的電纜冗余系統。端子模塊上的 LED 顯示 EK1521 的工作狀態。
In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.BECKHOFF倍福ek1520耦合器ek1521 全新現貨端子模塊
| Technical data | EK1521 |
|---|---|
| Task within EtherCAT system | coupling of EtherCAT junctions via multimode glass fibre |
| Data transfer medium | multimode glass fibre 50/125 μm (MM) |
| Distance between stations | max. 2000 m (100BASE-FX) |
| Number of EtherCAT Terminals | – |
| Type/number of peripheral signals | – |
| Protocol | EtherCAT |
| Delay | approx. 1 μs |
| Data transfer rates | 100 Mbaud |
| Configuration | not required |
| Bus interface | 1 x SC Duplex |
| Power supply | from E-bus |
| Current consumption E-bus | typ. 350 mA |
| Current consumption 24 V DC | – |
| Weight | approx. 65 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Approvals | CE, UL, Ex |
| Further fibre optic products | |
|---|---|
| EK1521-0010 | 1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km |
| EK1501 | EtherCAT Coupler with ID switch, multimode fibre optic for E-bus terminals (ELxxxx) |
| EK1501-0010 | EtherCAT Coupler with ID switch, singlemode fibre optic for E-bus terminals (ELxxxx), distance between stations up to 20 km |
| EK1501-0100 | EtherCAT Coupler, media converter (multimode fibre optic to RJ45) with ID switch |
| CU1521 | EtherCAT media converter fibre optic, IP20 |
| EP9521 | EtherCAT/Industrial Ethernet module EP9521 for Industrial Fast Ethernet/100 Mbaud |
| 技術參數 | EK1521 | EK1521-0010 |
|---|---|---|
| EtherCAT 系統內的任務 | 通過多模玻璃纖維連接 EtherCAT 分支耦合器 | 通過單模玻璃纖維連接 EtherCAT 分支耦合器 |
| 數據傳輸介質 | 多模玻璃光纖 50/125 μm（MM） | 單模玻璃光纖 9/125 μm（SM） |
| 站點之間的距離 | 最長 2 千米（100BASE-TX） | 最長 20 千米（100BASE-TX） |
| EtherCAT 端子模塊數量 | – | |
| 外設信號類型/數量 | – | |
| 協議 | EtherCAT | |
| 延遲 | 約 1 μs | |
| 數據傳輸率 | 100 Mbaud | |
| 組態 | 無需配置 | |
| 總線接口 | 1 x SC 全雙工 | |
| 電源 | 由 E-bus 供電 | |
| E-bus 電流消耗 | 通常為 350 mA | |
| 24 V DC 電流消耗 | – | |
| 重量 | 約 65 g | |
| 工作/儲藏溫度 | -25…+60 °C/-40…+85 °C | |
| 相對濕度 | 95 %，無冷凝 | |
| 抗振/抗沖擊性能 | 符合 EN 60068-2-6/EN 60068-2-27 標準 | |
| 抗電磁干擾/抗電磁輻射性能 | 符合 EN 61000-6-2/EN 61000-6-4 標準 | |
| 防護等級/安裝位置 | IP 20/可變 | |
| 認證 | CE，UL，Ex | |
| EK1521 | EtherCAT Terminals | 1-port EtherCAT multi-mode fibre optic junction |
| EK1521-0010 | EtherCAT Terminals | 1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km |
| EK1541 | EtherCAT Terminals | EtherCAT Coupler with ID switch, plastic optical fibre for E-bus terminals (ELxxxx) |
| EK1561 | EtherCAT Terminals | 1-port EtherCAT plastic optical fibre junction |
| EK1110 | EtherCAT Terminals | EtherCAT extension |
| EK1814 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 4 digital inputs 24 V DC, filter 3.0 ms, type 3 – 4 digital outputs 24 V DC, 0.5 A, 1-wire system |
| ek1818 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 8 digital inputs 24 V DC, filter 3.0 ms, type 3 – 4 digital outputs 24 V DC, 0.5 A, 1-wire system |
| EK1828 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 4 digital inputs 24 V DC, filter 3.0 ms, type 3 – 8 digital outputs 24 V DC, 0.5 A, 1-wire system |
| EK1828-0010 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 8 digital outputs 24 V DC, 0.5 A, 1-wire system |
| EK1914 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital standard and safety I/Os: – 6 digital inputs, 2 of which are fail-safe inputs, 24 V DC, filter 3.0 ms, type 3 – 6 digital outputs, 2 of which are fail-safe outputs, 24 V DC, 0.5 A, 1-wire system |
| EK3100 | EtherCAT Terminals | PROFIBUS Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK5100 | EtherCAT Terminals | CANopen Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK5200 | EtherCAT Terminals | DeviceNet Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9000 | EtherCAT Terminals | Ethernet Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9300 | EtherCAT Terminals | PROFINET RT Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9500 | EtherCAT Terminals | EtherNet/IP Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9700 | EtherCAT Terminals | SERCOS III Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK1960 | EtherCAT Terminals |
TwinSAFE Compact Controller for EtherCAT Terminals (ELxxxx) with integrated I/Os: – 20 safe digital inputs 24 V DC – 8 safe digital outputs 24 V DC, 0.5 A, 1-wire system – 2 safe digital outputs, potential-free make contacts |
| EL1002 | EtherCAT Terminals | 2-channel digital input terminal 24 V DC, filter 3.0 ms, 4-wire system |
